IKEA Wood Dowel x10 Pack (IKEA Part #101375)

Product Information

Just a few hundred steps away from the IKEA prototype shop were the desks of designers Knut Hagberg and Marianne Hagberg. Brother and sister, both are furniture designers and interior decorators. Both wild and creative. And always working as a team. Marianne Hagberg says, “We were both hired in 1979 and our first assignment was to ‘do great things’.” You will need to use a sharp chisel and be very careful not to damage the surrounding wood. First, make a small pilot hole in the center of the dowel with the tip of the chisel. Next, insert the chisel into the pilot hole and start prying up on the dowel.

IKEA Furniture Hack with dowels: From drab to fab

Instead of a knob for the drawer we wanted a keyhole. My god how we fought for that!” Knut Hagberg remembers. If the peg is holding two pieces of wood together (such as a dowel), you will need to use a drill to remove it. First, drill a hole in the center of the peg. Then, use a screwdriver or another tool to turn the peg until it comes loose. Finally, sand down any rough edges left behind by the drilling. How Do You Get a Wooden Dowel Out of Ikea Furniture? It takes a long time to create something great. I saved the first prototype. Actually I still have all the versions that didn’t really work out. You never know, they might inspire you to do something else later on,” adds Anders Eriksson. Ikea furniture is known for its simple, clean lines and minimalist design. But sometimes, the most basic pieces can be the most difficult to assemble. If you’ve ever struggled with getting a wooden dowel out of an Ikea piece of furniture, you’re not alone.

He and Göran Sjöstedt started testing and trying, using the CNC machine, a Computer Numeric Control machine where you program your pattern, and it delivers a wood model of the drawing. We always draw by hand on big white paper. Eye, brain, paper. Always in 1:1 scale, and when we’re done drawing we walk over to the prototype shop and build a first prototype.”

Wood Dowels – MissingScrew

It was great when our idea got patented, although that was never the motivation,” Göran and Anders agree. “It just felt so good that we had done something that made it easier for the customer. With the wedge dowel you can assemble much faster, but it’s also easier due to the fact that the dowel is fixed to one of the two sides that are going to be assembled. Pretty fail-proof.”Read Also: Problems With Valspar PaintFirst, try using a screwdriver or other pointed tool to loosen the dowel from the furniture piece. If that doesn’t work, you may need to use a saw to cut through the dowel. One method is to use a sharp knife or chisel to score the surface of the dowel pin. This will help break the bond between the dowel pin and the surrounding wood. First, you need to determine what type of joint the dowel is holding together. If the joint is glued, you will need to use a chisel or saw to remove the dowel. If the joint is not glued, you may be able to simply pull the dowel out by hand. Yes, we refused to use a knob and the manufacturer refused to accept the keyhole. But we solved it with a long, drawn-out, heated argument,” Marianne laughs.

IKEA furniture—how can I deal with broken dowels? Disassembling IKEA furniture—how can I deal with broken dowels?

Kallax shelving. Accidently broke the wooden dowels. Decided to just shove the small piece at the bottom in but have put it slightly to the left. Does anyone know if this risks the structural integrity of the shelving? This is a 4x2 kallax placed vertically full of books the whole way up Second, you need to make sure that there is no other hardware attached to the dowel that could be damaged during removal. Finally, if possible, it is always best to work with someone else when removing wooden dowels so that one person can hold the piece of wood steady while the other person removes the dowel. The wedge dowel that Anders and Göran invented together is a solution that may not blow your mind visually, but from an innovation perspective it’s rather fantastic. Firstly, this tiny part cuts the assembly time of IKEA furniture by half. Secondly, all the fittings on machine-made furniture become invisible. Beauty and brains!It all started when Anders Eriksson created a trestle with milled grooves. It was extremely sturdy, and it got him thinking. Next, use a drill or power drill fitted with a bit slightly smaller than the diameter of the dowel to create a hole in the center of the dowel. Start by lightly tapping the end of the dowel with a mallet or hammer. This will loosen it up and make it easier to remove. Storage & organisation Decoration Furniture Textiles Outdoor products Kitchen & appliances Lighting Smart home Beds & mattresses Baby & children Kitchenware & tableware Bathroom products Office furniture Rugs, mats & flooring Laundry & cleaning Home electronics Pots & plants Home improvement Food & beverages Summer Christmas Rooms

Spare parts - IKEA - IKEA Spare parts - IKEA - IKEA

The cleverness of the wedge dowel took a further leap thanks to Knut and Marianne. They were challenged by the idea of creating a craftsmanship feature that would fit in with IKEA mass production. A series of tables was designed where they used ash veneer on the table top and solid birch for the legs. Initially they called the collection ‘Gasell’, a name that reflected their idea about a light, graceful table on long legs. The notion of non-visible fittings enhanced the elegant gazelle, and the wedge dowel was a given in the collection. It was also a given how the details in the design would look. If you’re looking to remove a wooden dowel from IKEA furniture, there are a few things you’ll need to know. First, it’s important to understand that IKEA furniture is not designed to be disassembled and reassembled multiple times. This means that the wooden dowels holding the furniture together are meant to be permanent fixtures. I was thinking a lot about its construction and wondered if you could apply this principle on furniture other than trestles. See, the milled grooves provide tremendous stability,” says Anders. However, if you’re moving or simply need to take your IKEA furniture apart for some reason, removing the wooden dowels is possible with a little effort. Here’s what you’ll need to do:With the hole drilled, insert a screwdriver into the hole and twist until the dowel pops out from its seat in the wood. Be careful not pull too hard or you may damage the surrounding wood finish. Conclusion Once you’ve cut through the dowel, gently pry it out of the hole with a screwdriver or similar tool. If necessary, sand down any rough edges on the wood before reassembling your Ikea furniture. There are a few ways to remove wooden pegs from furniture, depending on the type of peg and the furniture. If the peg is decorative and not structural, it may be held in place with glue. In this case, you can use a putty knife or other blunt tool to pry the peg off. With the wedge dowel, you don’t need fittings at all. The clever wooden piece replaces all metal fittings in the construction.