Joined in 2023 
82 
63 About this deal
Again, cheap flash, so I wasn’t expecting much on the functionality side but it’s actually has quite a lot built into it. Nissin MG10: Is a high-powered hammerhead flash gun that requires a commander to trigger it. It’s not a hot-shoe-mounted flash but would partner well with the Di700. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery. The wall or ceiling should be a plain, white color for high reflectance. If the bounce surface is not white, a color cast may appear in the picture. Provided multiple functions, include manual flash, multi flash, HSS (up to 1/8000s), second curtain sync, FEC, etc. If you fire more than 30 continuous flashes and then fire more flashes in short intervals, the inner over-temperature protection function may be activated and make the recycling time over 10 seconds. If this occurs, allow a rest time of about 10 minutes, and the flash unit will then return to normal. this device must accept any interference received, including interference that may cause undesired operation.Godox lists 0.1-2.2 seconds recycle for this unit, but in my tests, this isn’t quite accurate. From the moment of pushing the fire button to the moment the ready light came on was somewhere between 3 and 4 seconds for me. I’m using Eneloop Pro NiMH batteries, which have reduced recycle times in every other flash I have used. Using standard alkaline batteries increased the recycle time to nearly 6 seconds. But, considering there are only two AA batteries recycling the flash, this is still respectable. Not great if you’re in a pit of journalists, but quite usable for a portrait session."
Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result. The following table lists the available and unavailable custom functions of this flash. C .Fn Custom Functions The M group in Master dictates what the flash does on-camera. Press Mode to switch between flash off, TTL and Manual.In this user manual, "master unit" refers to the camera flash on a camera and "slave unit" will be controlled by the master unit. The head offers 270 degree rotation laterally and 90 degree rotation vertically. This is in line with most external flashes. A failure occurs on the recycling system so that the flash cannot fire. Please restart the flash unit. If the problem still exists, please send this product to a maintenance center. The small size and weight of the TT350 make it the perfect on-camera flash for any camera system, particularly mirrorless systems. While I’m using them with a Fuji, they’re also available for Canon, Nikon, Sony, Olympus/Panasonic and even Pentax. Display" Lo": When the flash output value is up to the minimum value, "Lo"will be displayed and blinking for 3 seconds. Adjust the camera's parameters if overexposure appears. FEC: Flash Exposure Compensation
Godox TT350F is fully compatible with Fujifilm’s through-the-lens (TTL) metering for automatic exposure control and supports HSS. TTL flash metering greatly simplifies the process of using off-camera flashes, especially when multiple units are involved, while high-speed sync enables the use of flash at shutter speeds up to 1/8,000 second. Godox TT350F is without a doubt one of, if not the best budget-friendly flash for Fuji cameras on the market right now.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. I just got the X-E3 and the flash, and the flash works just fine. I shoot with the camera in manual mode and the flash in TTL, I also tried the manual mode for the flash, and it worked just fine too. Long Press the < SYNC> button for 2 seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit. You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to OFF. Master Unit Setting Fuji cameras are divided into three kinds according to their different controlling ways to camera flash: A
Great Deal 
New Comment