RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

Product Information

The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Colours: The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.

We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. For the following wood types, a weathering period is recommended. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply! A range of interior and exterior wood oils suitable for any project and wood type. Includes traditional wood oils, Hardwax oils, wood oils with UV filters and more.

Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Coverage 1 coat up to 8sqmetres/litre of smooth timber and up to 5sqmetresonrough sawn timber, 2 coats recommended.

Key benefits of decking oil treatments

The first coat will be rainproof in two hours and after six hours, it will be ready for a second coat. Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel.

Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces. Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For the best protection, apply an exterior wood preservative to protect against mould, algae, dry rot, woodworm and wood related diseasesEnsure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required). Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth). P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.

If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading.

When to apply decking oils

Fatty Acid Cobalt Salt. Hydrocarbons, C10-C13, nalkanes, isoalkanes, cyclics, 2% aromatics. 1,2-Benzisothiazolone. reaction mass of: 5-chloro2-methyl-4-isothiazolin3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol3-one [EC no. 220-239-6] (3:1). A traditional way to seal and protect wooden surfaces whilst achieving a sympathetic natural finish. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying.