Joined in 2023 
82 
63 About this deal
The O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom.
Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.Clearance for High-Performance CPU Cooler and ATX PSU Although O11 Air Mini is a compact case, it provides up to 167mm height CPU clearance, allowing users to mount their performance CPU cooler in the system. Lian Li has also introduced the O11 Air Mini along with several other products at its DIGITAL EXPO 2.0. Thus, the popular O11 family gets a new offshoot, which advertises with extra airflow. Whether the attempt to build a case that advertises with „mini“ and an airy design, but not lose the high demands on … (Weiterlesen...) X3 / 140mm X2 (ด้านข้าง) 120mm X2 (ด้านล่าง) 120mm X2/ 140mm X2 (ด้านหน้า) 120mm X2/ 140mm X2 (ด้านหลัง)120 mm X1
The power supply is mounted in the Lian Li O11 Air Mini as usual with four screws. Well thought-out by Lian Li: The power supply is slightly elevated and does not rest on the floor. This gives you the opportunity to neatly run cables underneath and thus reach the lower slots on the motherboard. Similar openings are also found on the upper edge. In the HDD/SSD case, the disks can be stored in two holders with the included screws. Once screwed tight, they can be put into the case. Practical test Once inside, you’ll spot room for up to an ATX motherboard in the main compartment, along with room for radiators and fans along the top, front, bottom and side. Two 140mm PWM fans come installed at the front intake, while the rear exhaust carries a single 120mm PWM spinner.
Unlike the case, Lian Li does not rely on aluminum for the frame. Instead, the manufacturer uses steel here. This benefits the stability of the case. All in all, the case makes a very good impression. Especially the workmanship leaves nothing to be desired. I am co-founder of this blog and am very interested in everything that has to do with technology, but I also like to play games. I was born in Hamburg, but now I live in Bad Segeberg. Corsair Dominator Titanium First Edition DDR5-6600 C32 2x32GB Review: Abundant Capacity And Performance
Both the O11 Air Mini and the O11 Dynamic Mini allow you to reconfigure the case to gain more room at the top for fans or a radiator. Pictured here: 5-slot mode on the O11D Mini (left) and 7-slot mode on the O11 Air Mini (right). Constructed of steel instead of aluminium, the O11 Air Mini no longer retains the initial focus on ITX builds, evident in the case's larger footprint. The undesirable feature of the unattractive bottom air filter is unfortunately still here. Despite these changes, the case has kept its cost reasonable, while its size remains relatively compact for an ATX case. A sophisticated profile is crafted through the steel mesh panel at the front, a change from the lively look of the Lian Li O11D Dynamic Mini’s glass side and front panel. However, the see-through side panel and the aluminium trim accent at the front remain. Configuration Options Our team of specialists would be more than happy to assist in choosing the right system for you and to discuss upgrades or technical advice should an issue arise. You will have noted the floor of the case is completely empty and could easily accommodate a second radiator so our key message is that Lian Li and Der8auer have come up with a clever design that gives you plenty of options.
Currently popular on idealo
The O11 AIR MINI comes with 2 x 140mm PWM front fans and 1 x 120mm PWM rear fan pre-installed straight out of the box. Get your system up and running faster with ease.
Fan mounts: 2x 120mm/140mm front, 3x 120/2x 140mm roof, 1x 120mm rear, 2x 120mm side, 2x 120mm/140mm floor. Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow.Whether you’re a casual or a hard-core gamer, Norton 360 for Gamers provides multiple layers of protection for your devices, game accounts, and digital assets. The second side panel is closed with an aluminum mesh panel. The two mesh strips sit directly above the PSU and HDD slots, as well as directly above the fan mount on the partition between the two chambers. In the event that fans are installed there, they will get enough air. I'm planning on booting my NZXT H510 hotbox in August with the release of the Lian Li O11 Air Mini. I've been on the hunt for an ATX case that isn't much bigger than what I have and will give me drastically better thermals at a whisper quiet. I am currently running a 280mm AIO as intake, with a 120mm Noctua for rear exhaust, and 140mm Noctua for top exhaust. I had some great temps on my ASUS TUF 3080 in quiet mode, but needed to add the 280mm AIO to calm my 5600X. I'm planning on transitioning all components and will decide on either going cheap with Arctic P14/P12 fans, or drop some cash on RGB. I've attached an image of what I'm planning to do with the O11 Air Mini. The 280mm AIO will only fit on front or bottom (which won't work). Looking at this, this is going to be a real pressure positive case. Should I look to not do the side intake to make things as neutral as possible? Any experience with the other O11 cases I would think could help me here. Thanks! the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential,
Great Deal 
New Comment