Razer Panthera Evo: Fully Mod-Capable - Sanwa Joystick and Buttons - Internal Storage Compartment - Tournament Arcade Stick for PS4 and PS%

Product Information

Unless properly calibrated to your printer and viewing environment, your monitor does not accurately represent the brightness of paper. Artwork submissions may need adjustment to ensure prints are not too dark. Please read this helpful support article for more information The plunger - the part that you press down to represent an input - is 25mm or a bit smaller in most 30mm pushbuttons. Often this leads to the conclusion that one needs a 24mm button and not 30mm.

Razer Panthera Razer Panthera

Razer’s software platform, with over 50 million users, includes Razer Synapse (an Internet of Things platform), Razer Chroma (a proprietary RGB lighting technology system), and Razer Cortex (a game optimizer and launcher). One significant change from the original Panthera is that the Evo doesn’t use Sanwa buttons. Instead, the Evo features Razer Action Buttons, which use the same Razer Mechanical Switches that the company puts into its keyboards. With a 30-million tap life cycle, they should last a long time. Once you're done, you should have a total of 9 wires connected between the pcb and the breakout, 8 on the bottom pins and 1 on one of the top pins. Panthera PCB Wiring --- Alternate View

Sized for Razer Panthera EVO (2018 Model)

Hello! Does anyone know where you can buy a replacement plexiglass cover for the Panthera EVO? I tried looking around on the official razer store and also googled but found no store that sells it.

RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO - Reddit RAZER PANTHERA KAIMANA LED MOD UPDATED 2019, NO - Reddit

Now, you can choose the button insert cut to match the pushbutton you intend to use. This allows the insert to fit snugly within the cap. Brands and Model with Artwork Caps You now need to separate 11 of the Jumper Wires from each other, so you have 11 individual wires. You need to remove the Plastic Casing from the male ends of each wire. If you're confused on which way to plug in the harness into the Mini, just plug it in so that the empty pins are on the left side of the Mini, like This.

High Resolution, Color Fidelity

There are six (6) Phillips head panel screws located underneath the Panthera EVO. These hold the tinted acrylic cover in place. Each one is accessed using a mini precision screwdriver. Anything larger will risk stripping the screw. Turn carefully - the screw will take a bit of effort to loosen on first go, but will give way. Once the screws are removed, find a safe place to temporarily store them as they are quite small and easy to lose. NOTE: YOU DO NOT NEED TO USE ALL 8 GROUND PINS ON THE RAZER PCB!!! The Razer 16-pin harness had 8 individual wires that each connected ground to a different button. However, your new 20-pin harness that connects to the Kaimana Mini uses 1 ground wire that daisy-chains to every button. This means you only need one ground wire for all of the buttons. I corroborated this with a certified electrician, so no need to somehow condense 8 ground wires into 1 wire for no reason whatsoever!