Thermawrap 600mm x 7.5m x 3.7mm General Purpose Wrap Easy Fit General Purpose Insulation for Wall and Floor Application

Product Information

Fiberglass insulation is made from molten glass that is spun or blown into fibers. Most manufacturers use up tp 40% to 60% recycled glass content. Loose-fill insulation must be applied using an insulation-blowing machine in either open-blow applications (such as attic spaces) or closed-cavity applications (such as those found inside existing walls or covered attic floors). Learn more about where to insulate. Built in airtight vapour control layer to prevent the passage of moisture, reducing the risk of condensation Applied using small spray containers or in larger quantities as a pressure sprayed (foamed-in-place) product. Fire safety is a concern, but when the interior of the SIP is covered with a fire-rated material, such as gypsum board, it protects the facing and foam long enough to give building occupants a chance to escape. As in any house, insects and rodents can be a problem. In a few cases, insects and rodents have tunneled throughout the SIPs, and some manufacturers have issued guidelines for preventing these problems, including:

General Purpose Insulation - YBS Insulation

Step 1 – Start by applying timber battens to the conservatory roof spars, mechanically fixing into place using suitable screws. Suited for standard stud and joist spacing that is relatively free from obstructions. Relatively inexpensive. Sprayed or foamed-in-place applications of polyurethane insulation are usually cheaper than installing foam boards, and these applications usually perform better because the liquid foam molds itself to all of the surfaces. All closed-cell polyurethane foam insulation made today is produced with a non-HCFC (hydrochlorofluorocarbon) gas as the foaming agent.

Similar products

Send us your specifications and technical drawings and we will assess all available insulation choices and provide you with personalised recommendations that achieve your goals. Obtain written cost estimates from several contractors for the R-value you need, and don't be surprised if quoted prices for a given R-value installation vary by more than a factor of two. Our insulation grade aluminium foil inner layer also increases the overall thermal performance of the application and creates a vapour control layer once taped and sealed, keeping the room warmer in the winter and cooler in the summer. Good for adding insulation to existing finished areas, irregularly shaped areas, and around obstructions. Slow-curing liquid foams are also available. These foams are designed to flow over obstructions before expanding and curing, and they are often used for empty wall cavities in existing buildings. There are also liquid foam materials that can be poured from a container.

SuperFOIL Insulation - High Performance Foil Insulation SuperFOIL Insulation - High Performance Foil Insulation

ThermaWrap is the UK’s leading reflective DIY insulation brand, offering high thermal performing products at a cost-effective price. Our ThermaWrap insulation product range covers multiple applications throughout the home, garden, workplace, leisure activities. Polyisocyanurate insulation is available as a liquid, sprayed foam, and rigid foam board. It can also be made into laminated insulation panels with a variety of facings. Foamed-in-place applications of polyisocyanurate insulation are usually cheaper than installing foam boards, and can perform better because the liquid foam molds itself to all of the surfaces. From architects to first-time self-builders, our experienced team will work with you to ensure your project achieves the best possible results.Firstly, measure the size of your conservatory roof and calculate the amount of insulation required. We know choosing the correct insulation is an integral part of the long-term success and energy efficiency of your project. For this reason, SuperFOIL has a team of highly trained experts who are there to help you. There are two types of foam-in-place insulation: closed-cell and open-cell. Both are typically made with polyurethane. With closed-cell foam, the high-density cells are closed and filled with a gas that helps the foam expand to fill the spaces around it. Open-cell foam cells are not as dense and are filled with air, which gives the insulation a spongy texture. Foam board, to be placed on outside of wall (usually new construction) or inside of wall (existing homes): In building projects, even the smallest mistakes can lead to thousands of pounds worth of loss. With our high-performance, quality range of foil insulation, you can save money but still get a high-quality product.