7pcs 35mm Stainless Steel Heat Gun Nozzles Kits for Hot Air Gun Soldering Station Nozzle Tool

Product Information

The STEINEL nozzle is designed for STEINEL tools HG 2420 E, HG 2620 E, HG 2520 E, HG 4000 E and HG 2300 EM. STEINEL Surface Nozzle

Heat Guns | Hot Air Guns | Toolstation Heat Guns | Hot Air Guns | Toolstation

Glass protector nozzle: This nozzle allows you to strip paint and varnish, etc from neat a glass pane, without warming and melting the putty or glass. It the putty is warmed it can become soft and the glass can work loose, possibly falling out. To prevent this happening this nozzle directs the heat from the gun away from the glass and on to the surface where you need it When using a heat gun to strip paint, the heated air is directed on to the painted surface, helping it to soften so that it can be easily stripped off.

How to Use a Heat Gun Safely

Heat guns are electric hand tools which look and work in a similar way to hair dryers – operating a fan that pulls air into the body of the tool and drives it across an electric heating element and out through a nozzle. Heat guns are sometimes referred to as hot air guns.

Heat Gun UniversalHeat 600 (1800 W Bosch Home and Garden Heat Gun UniversalHeat 600 (1800 W

One advantage of this tool is the heat is almost instantaneous, so it can be switched off during pauses while working – whereas flame blow torches need to be relit if the flame is extinguished, which is less convenient. A heat gun is a device that produces a stream or jet of heated air that is projected from the front opening and is then usually used for stripping paint, varnish and other similar jobs. Fact: How hot is a heat gun? Most regular heat guns have a minimum temperature of around 49°C (120°F)Before you start work, ensure that the cord is long enough to easily reach the area you’re working in – if it isn’t, plug the heat gun into an extension lead to extend your reach. Move the gun around, as holding it still in one can cause charring or burning of the wood. Hold the heat gun with one hand and use a putty knife or scraper to go along behind the gun and scrape away the loosened paint. These advanced STEINEL heat guns give the user effective control over temperature output to prevent scorching or blistering tubes or sleeves. STEINEL Sieve Reflector Nozzle

Using a Heat Gun to Remove Paint and Varnish | DIY Doctor Using a Heat Gun to Remove Paint and Varnish | DIY Doctor

To strip paint you are unsure of in a safe way you should use a non-solvent paint stripper called Home Strip. You can find out more about this in our stripper, in the section marked Home Strip and Lead Based paints. Buying a Heat Gun This heat gun is perfect for use in a multitude of jobs such as plastic and pipe welding, soldering, and cable shrinking. Additional Information As a simple hand tool, there aren’t many differences between the various models of a heat gun, but here are some important features to consider: Additionally heating paint can give off dangerous fumes so always strip paint using a heat gun in a well ventilated space and always use a suitable respirator face mask. Children, animals and pregnant women shouldn’t be nearby when a heat gun is being used to strip paint, as the fumes emitted by the melting paint could be harmful.Phone screen repair – heat guns can be used to remove damaged phone screens. Slowly heat the surface with the gun set to low and about eight to ten inches from the phone. The adhesive will become pliable enough to work with.

Nozzle (Thawing, Paint, Ø 33.5 x 75 mm Bosch 1x Flat Jet Nozzle (Thawing, Paint, Ø 33.5 x 75 mm

There will be some paint that will be difficult to remove as it has not been warmed sufficiently or is trapped between the grain. Don’t risk burning or discolouring the wood by using the heat gun on these little bits. Simply sand down the wood to get a great finish, or use a paint stripper which will not damage the surface. See our project on other ways to strip paint. Be Aware of Lead Paint on Older Doors, Fittings and Furniture This style of heat gun nozzle is used primarily in the roofing industry to lap weld difficult to reach areas, such as near vents.

The materials to be welded should be prepared properly and placed into position. Then you can heat the seam and feed a welding rod into the nozzle where it will be heated and applied. The heat gun is then dragged along the length of the seam to apply the plastic. STEINEL Reflector Nozzle Reduction nozzles are also used to solder and desolder components in the electronics industry. Concentrated heat (400-455°C) loosens the solder joints, allowing the component to be removed with pliers. There are other uses of the heat gun where having lower air flows and/or lower temperature ranges can be useful, such as: Some heat guns can be used on a stand so that both hands are free to work with other tools alongside the hot air. To get the most effective temperature, any heat gun can be held further away from the surface to reduce the heat, but having variable settings offers more choice.