Warmup Underfloor Heating StickyMat 150W/m² Electric Heating Mat 3m² (SPM3)

Product Information

For thisexamplequote,we’ll choose a sub-floor type of concreteand the popular bathroom floor type of vinyl. Divide the floor into a series of rectangles. From these measurements you can calculate how many mats you'll need and what sizes. Exclude permanent or static fixtures from your calculations.

To work out which system is best for your project, consider the room type, the size of the project and whether you will be installing a heater into a new-build or retrofitting into an older property. The Nexxa Panel System uses a castellated membrane on which to position the heating pipe in an optimal layout design. Rails Warmup Smart Care is the next generation in customer service, providing real-time help for your floor heating needs. If your heating system isn’t working as it should, for instance if your room isn’t reaching its target temperature, the Warmup Smart Care team can help diagnose the problem remotely, often within a matter of minutes – without the need of a home visit from an engineer.If you intend on using vinyl, carpet, timber, tiles or any other underfloor heating compatible floor finish, the system can (and should, in some cases like for carpet) be embedded within a self-levelling compound to provide a flat and level floor surface to lay over. Should a fault develop after installing your new heating system, we’re here to help. For immediate troubleshooting advice, you may be able to find everything you need on our Warmup Support online portal. Here you’ll be able to view informative technical support for many of our products. Electric systems offer rapid installation times, have low-profile system dimensions and can be used in almost all project types. Electric floor heaters are available as either a Heating Mat system or a Heating Wire system. Lay the first run. At the end of the run cut the mat leaving the cable intact, turn the mat through 90º or 180º and continue laying. When the area is covered, adjust the mat until the loops are equal distance apart. Now attach the mat to the subfloor using the special tape supplied. Once you’ve got the heated area size, you’llalsoneed toconfirm your bathroom’s sub-floor type (the layer beneath your current flooring) andyour chosen floor finish you’ll be installing the heater with.Underfloor heating systemscan be used with almost all floorfinishes –from carpets to natural stonetiles andlaminate to vinyl.

We pride ourselves on the durability of our underfloor heating systems but we understand that mistakes can happen whilst installing them, for instance the heating wire or pipe could get damaged as you’re fitting the system which may cause problems later on – especially if it has not been tested according to the manufacturer’s instructions. We advise testing the system before it is laid down, once it has been laid down and most importantly, before tiling or applying final flooring on top of the system. If you do find yourself in the position of needing an engineer to visit your home to assess a problem with your heating system, there are ways of finding out where the fault is without having to lift the entire floor. We can detect a faulty heater by using a thermal imaging camera and specialist testing equipment which is used to locate the exact point of fault. The damaged cable or pipe is then accessed by lifting the floor for that area only and fixing the damaged part. This means that you can have complete confidence in our system and that there is minimal damage to your flooring should a repair be necessary.

Features of Manual Thermostats

Warmup heating cables and Loose Wire systems come without a membrane and are specifically designed for areas where you have many fittings to work around or irregularly shaped rooms when installing underfloor heating. Loose Wire System The Loose Wire System (DWSWire System) is an incredibly flexible and durable cable that can easily be maneuvered around fixings. Loose Wire comes in a minimum heat output of 150W/m² but it’s variable depending on the spacing. The Loose Wire system can be bought as an electric underfloor heating kit that contains all the essential elements for it’s installation; the heating cable, primer, tape, roller and the installation manual. Inscreed Cable System

We would recommend one of our low-profile electric systems or our Total-16 hydronic system if you are retrofitting a heater or if your project has fixed ceiling heights. If you are building a home from the ground up, consider specifying a water system during the design stages of your project to take its dimensions into account. Early Start function learns how long it takes to heat your room so it's up to temperature at the time you set Alternatively, the Foil Heater System offers a completely dry construction that does not require a leveling compound (unless it is to be used underneath a tiled floor finish). Or, if the area is irregularly shaped (not a square or rectangular form), or has multiple permanent fixtures in it (like a bathroom, for instance, with toilets, baths, sinks and more), Warmup’s Loose Wire System is the more suitable solution. Compatible With All Floor Coverings Please Note: The following is intended as a guide only. Always refer to the full installation manual for instructions.The 200W/m2 variant is ideal for use as a primary heat source in well-insulated areas, as the insulation boards retain heat in the room for longer and prevent downward heat loss. It can be installed on both timber and concrete subfloors.