DWE7485 Compact Table Saw 1850W 240V

Product Information

The difference lies mainly in the blades and the stand provided with the table saw. DWE7491 is a basic model with no folding stand. But DWE7491RS has a rolling stand for support. It can also be folded after use to store and carry easily. What Is The Difference Between Dwe7491 And Dwe7492?

While you can use this feature if you are learning your way around the table saw and its features, I would recommend against it if you are looking for precision in your work. You will only get 12-inches of rip capacity to the left of the blade, however. Keep in mind that shorter left-of-blade capacities are normal for most products that are available. That limits left-handed users in controlling the material with their non-dominate right hand (or cutting boards of 12-inches or less in width while using the dominant left hand for control). 3. Blade and adjustments

Cookie Notice

The material of the blade will help you decide exactly what materials you plan to cut using your table saw. Another important aspect is the maximum speed of the blade, to ensure its compatibility with the motor of the table saw you are planning to use it with. These saws are expensive and use up a lot of space. They are further classified into contractor, hybrid, and cabinet models depending on their size, tool compatibility, and output power A blade brake helps to bring the blade to a complete stop once the table saw has been turned off. This means that the blade isn’t left spinning after the cuts have been made, reducing the chance of injury. While this has a portable design, the onboard storage hasn’t been compromised. Sure it doesn’t have the roll cage found on other saws, and yes, it does have more hard plastic, but that just makes it a more portable option. The basic features that most table saws offer include storage facilities for tools as well as dust chutes and ports that assist in chip collection while cutting through materials.

Adjusting the bevel of the blade is simple thanks to the easy-adjust miter gauge, which works in increments of 1-degrees; towards the table top on the right of the miter gauge is a micro-adjustment knob, which allows you to make those micro-adjustments to your bevel angle. Along with the powerful motor, the dwe7491rs model has a 32-1/2 inch rip capacity that facilitates heavy-duty cutting tasks. So, this product can cut through different large size shelving and trim materials. Due to the table provided for support, the saw works smoothly and cuts narrow rips. Is The Dewalt Dwe7491 Still Available In The Us?Power-loss reset prevents accidental restarts following a power disruption when the tool is left in the on position The dwe7491 fence rails help with narrow rip cuts and reach a depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at half the angle. In addition, there is a dust collection port to keep the work clean. To the right of the blade, when fully extended, you get 24.5 inches of rip capacity, that’s easy enough to handle four by eight sheets of OSB of plywood. Making this a fantastic choice for those doing cabinetry, though, for those doing large cabinetry, this could be a challenge for the DeWalt DWE7485. The saw is also perfect for those looking for a compact saw that has an extendable range when required. It works in situations where you do not have too much space to set up a permanent table saw in your workshop. Dwe7491rs fence: We can get an auxiliary fence for this model that comes as a replacement part. It doesn’t need any extra tools to set on the table, simply is pushed and placed.