Bestway Underwater Adhesive Pool Kit

Product Information

Deflate the liner slightly to eliminate the bulging. Please be aware changes in the ambient temperature outside will cause the air inside the liner to expand or contract. On hot summer days we would suggest deflating the pool ring slightly. On colder winter days you may notice the liner looks a little soft and needs some more air.

If the hole is located in an area away from water for example in the top ring of your pool then you may be able to get away with not emptying or not completely emptying your pool. If the hole is not in the air ring but is allowing water out then you must drain your paddling pool before you apply the repair patch.

Customer reviews

Try not to allow any air bubbles to form as this will affect the bonding over longer periods of time.

This will prevent any dirt or water from stopping the patch from adhering properly to the surface of the paddling pool. Google: Google's policy requires identification of each party that receives end users’ personal data as a consequence of using a Google product. Google also requires prominent and easily accessible information about the use of end users’ personal data. We have published information about Google’s uses of information on this link If you are applying a patch to a hole in the water-filled section this should be placed on the outside area and not on the inside of the pool. To add extra strength to your repair, you can add a second patch on the inside of the pool.

About 10x UNDERWATER ADHESIVE REPAIR PATCH

First, you need to find the hole in the paddling pool, and then you can fix it using a suitable paddling pool repair kit.

To fix a puncture you will require a repair kit. We would suggest using a waterproof repair patch or epoxy vinyl glue. The following steps will guide you through how to fix a hole in a paddling pool. As long as you follow the steps you will find any hole fairly simple to repair. Duct tape will last slightly longer than sellotape and parcel tape but will still not last very long. You may get a couple of uses out of your paddling pool with duct tape on it but you’ll find that your time will be wasted in the long run. Mould can occur if the pool is not completely dry when folded or put away. Humidity and dampness can cause mould to grow due to stagnant water.This is normally caused either by the pool not being set up on flat level ground or someone standing or leaning on the frame of the pool. We would suggest moving the pool to a more suitable location. We would also advise that you do not stand on the frame of the pool, the ladder must be used for entering and exiting the pool. This type of damage is not covered under the manufacturer’s warranty so you may need to replace parts.