Geo-Fix All Weather Paving Joint Compound | Permament Joint Filler for Dry and Wet Conditions with Hydrophobic Characteristics - Grey - 20 kg

Product Information

Work the Geo-Fix All Weather Jointing Compound into the joints with a pointing tool. Top up and compact ensuring a fully compacted and topped up the joint. Carefully sweep off any excess with a soft brush ensuring that the material is swept at a 450 angle to the joints. To ensure a perfect joint, press the Geo Fix Paving Joint Compound into the joints with a pointing tool or compact into joints using a vibrating plate. Top up as necessary. Geo-Fix® is supplied ready to use and DOES NOT require any further mixing or addition of any other materials. Application

Geo-Fix Original Method | Geo-Fix - FatStack Geo-Fix Original Method | Geo-Fix - FatStack

The figures given below are approximate quantities required at 25mm depth per 20kg of Geofix) Joint width As the company cannot be aware of all the applications and materials the product may be used on, it is the user’s responsibility to determine suitability for use. Product informationUse Geo-FixÒ All Weather Jointing Compound within 45 minutes of opening. In temperatures exceeding 25oC, the material must be used within 30 minutes of opening the bag. Always follow the manufacturer’s instructions carefully.

Application | Geo-Fix - FatStack Application | Geo-Fix - FatStack

GEO-FIX is supplied ready to use and does not require any further mixing or addition of other materials. Ensure that the paving to be jointed is dry and free from loose dirt, oil, debris and grease etc. Geo-Fix All Weather Jointing Compound is a unique, ready to use jointing material that’s suitable to use on all types of paving, which have joints with a minimum of 6 mm width and 25mm depth. The excellent flexural properties of Geo-Fix® All Weather make it an ideal compound for jointing paving elements.Geo-Fix®Original forms a solid joint that resists weed and plant growth yet is water permeable, allowing water to escape to prevent ponding. Geo Fix is supplied ready to use and does not require any further mixing or addition of other materials. Geo-Fix All Weather Jointing Compound can withstand almost any amount of rain without the quality of the product being compromised. Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush. Material or residue that has been left exposed for more than 30 minutes should NOT be used, as it will be adversely affected. Geo-Fix® Original is easily finished by compacting with a pointing tool saving valuable time compared to traditional wet pointing.

Geo-Fix Original | Geo-Fix - FatStack Geo-Fix Original | Geo-Fix - FatStack

Any residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush. Coverage I found that this did exactly what I wanted with great results.I was using it to repair old tatty grouting in between grey granite patio slabs. Geo-Fix® All Weather forms a solid joint that resists weed and plant growth yet is water permeable, allowing water to escape to prevent ponding. Finish the surface decoratively giving a smooth flat finish with a pointing tool before moving onto the next area to be jointed.The jointing should not be cleaned by use of high pressure washers until cured for 7 days. The distance between nozzles to jointing must be at least 10cm. It is essential the joint widths are a minimum of 6mm wide with a minimum depth of 25mm. deeper joints can be filled with dry sand or other materials to meet the required minimum depth. If you do what it says on the tub – the tub does what it says. Make sure the surface and joints are completely dry. Ensure, as far as a forecast can be accurate, that the day you use the product is going to be dry. I used it just after 7am and left it to set for the rest of the day. It rained the following day – no breaking up or discolouration. Ensure that the paving to be jointed is dry and free from loose dirt, debris, oil, grease, etc. It is essential that joint widths are a minimum of 5mm wide with a minimum depth of 25mm. Deeper joints can be part filled with dry sand or other dry materials, to the required minimum depth. After application, brush off excess with a soft brush, taking care not to brush out any Geo-Fix® Original from the treated area. Geo-Fix® Original will harden over a 2-3 hour period subject to temperature.**