Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems ( disc brakes), hard disk drives, computer systems and consumer electronics. Initially, they were sometimes used in applications requiring tamper resistance, since the drive systems and screwdrivers were not widely available; as drivers became more common, tamper-resistant variants, as described below, were developed. [4] Torx screws are also becoming increasingly popular in construction industries. Torx Paralobe is a further developed Torx Drive System with 6% longer Flanks which results in a 20% higher applicable torque. [15] Torx Plus [ edit ] Torx Plus head pattern Torx (pronounced / t ɔːr k s/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 [1] by Camcar Textron. [a] A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal. [2] This is sometimes abbreviated in databases and catalogs as 6lobe (starting with the numeral 6, not the capital letter G). Torx Plus, Torx Paralobe and Torx ttap are improved head profiles. [3] For the Torx type of design, the angle is much closer to 90° than in the case of the hex head, and so for a given torque the potentially damaging radial force is much lower. This property allows the head of the fastener to be smaller for the same required torque, which can be an advantage in applications where space to accommodate the head is limited. Pavlis, Egon (16 March 2010). "When a Phillips is not a Phillips Plus So Much More!". Instructables.

The most common sizes of a Torx screw are T10, T15, and T25. There are also specialized Torx sizes, including T47, T55, T60, and T65. These are used in certain circumstances, but they are not as common as the T10, T15, and T25. Construction Range Overview (Fasteners: Introducing the AW Drive System, p. 3)" (PDF). Würth New Zealand. 2016. a b c d e "Chart of Torx fasteners and tools". Wiha Tools USA. Archived from the original on 2015-12-26 . Retrieved 2012-01-14.

Whether you are buying a new set of Torx tools or replacing a broken one, you will need to make sure you buy the right size. There are three standard sizes of Torx, and each one can be distinguished by the T before a number. In addition to these, there are also specialized sizes that are designed for specific uses. You can browse the chart below to find the right tool for your project. AW drive is a hexalobular-type screw head similar to Torx, with a tapered profile to aid in centering, developed by the Würth Group in Germany. [30] It is available in five sizes: AW10, AW20, AW25, AW30 and AW40. [31] Gallery [ edit ] Unlike other screwdrivers, Torx fasteners are made to be resistant to cam-out. This is a type of tampering that occurs when a torque is applied to a screw that exceeds its limit. The Torx bit creates a round hole to prevent this from occurring. TS Star Bits (5 Sided) 1/4"D 7pc - Part No. 3389 - Part of the TS Star/Torx* Plus range from Laser Tools" . Retrieved 14 July 2016. The SAE is an acronym for the Society of Automotive Engineers. It was created to standardize measurement in the engineering space. The SAE is now known as SAE International, and it has 138,000 members worldwide. The organization sets standards in North America for the construction and automobile industries.

The TORX(r) drive system has several benefits, including an easy solution to a common fastener problem, higher productivity, and enhanced reliability. You can also reduce total assembly costs by using the TORX(r) Drive System. SAE vs metric equivalents The following is a Torx Bit Sizes Chart for Internal Torx. Two dimensions are important with respect to Torx screws. They are Point to Point and Diameter of the screw threads. Torx Size The most obvious SAE vs metric equivalent is the size of the Torx bit. These bits come in a variety of sizes and are typically not interchangeable. The smallest of the lot is the T10, which is about the size of a 1/8" hex. The largest is the T47, which is about the size of a quarter. These bits are designed to work in many thread systems. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.If you need to know which size of Torx is the right one for a specific project, take a look at the Torx bit sizes chart. It will tell you which Torx bits are compatible with which screws. KC Tool