Do a visual inspection. This inspection is to see if there is any visible debris or rust built-up on the caliper, or any physical wear and tear. If you encounter resistance during the wheel turn test, the problem might be resolved by a thorough cleaning and lubrication of the brake caliper. This solution should be attempted before replacing the caliper itself, which can be quite expensive. Add Brake Cleaner to the Caliper The brake caliper in most cars is inside the wheel and can be found attached to the master cylinder of the brake system. If you’re unsure where the brake caliper is on your vehicle, consult the owner’s manual and it should point the component out in a diagram. A wire brush is best for cleaning the larger parts of the brake calipers, but a small toothbrush can help you get brake cleaner down into the nooks and crannies of the calipers without having to take them off the car. Tools for Removing the Tire

For it to work, don’t rush to scrub it right away. Give the cleaner some time to settle and absorb the stains and dust. 15 to 30 minutes should be enough time for that to happen. 4th step – Scrub the dirt away One of the essential tools is detailing brushes. The area around the brake calipers can be hard to reach with an ordinary cleaning brush. It’s important to keep your car brake calipers in good working condition, so you’re able to stop your vehicle safely when you need to in the event of an emergency. There you have it, guys. Cleaning your brake calipers is that easy. There is nothing more irritating than seeing your brake calipers dirty and full of brake dust.

Halfords Brake Cleaner 500ml

H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects.

The final step after cleaning your brake calipers is to lubricate them. Lubrication is vital in car systems because it helps prevent the wear and tear of components over time. Silicone lubricant is a good idea for lubricating the caliper’s slide pins, while molybdenum lubricant is recommended for areas of metal-on-metal friction. Learn more about quality brake parts, find your car part, or find where to buy your auto part today.You must analyze whether removing the wheels is worth it. Because if you don’t have enough space for brushes to penetrate through, cleaning them isn’t going to be easy. Examples include Chemical Guys, Turtle Wax, and Car Guys. It would help if you researched further which wheel cleaner may appeal the most to you. If you are dealing with such, we advise you to remove the wheel to have better access and invest in a more robust cleaner. You can be as thorough as possible when scrubbing the brake calipers. If you frequently clean brake calipers, you can do this once. But, if you have never cleaned them, prepare to spend some time scrubbing them. The other thing you need to buy is a wheel cleaner. You can use ordinary car shampoo, but brake dust can be stubborn to come off. Let’s not even get started with stains such as road tar.