Stir contents well, then dispense a portion into a separate container and seal can at once, keeping lid and grooves clean to avoid permanently sealing can shut. POR-15 Top Coat has excellent adhesion and when used over POR15 Rust Preventive Paint the products create a system works to provide a permanent barrier to corrosion. POR-15® high-performance coatings revolutionised rust protection. POR-15 products form an impenetrable barrier that protects a variety of surfaces from water, chemicals, salt, corrosive contaminants, and everyday wear and tear. POR-15® products are designed to work separately or as a complete system.

x 946ml Cleaner degreaser, 1 x 946ml Metal Prep, 1 946ml Tank sealer that will seal up to 18 US Gallon tank / 15 UK Gallon (68L) Another thing I've been curious about is "sealing" metal. Rust is oxidation, which needs oxygen to happen. Let's say you have a rusty piece of sheet metal, just a square chunk for ease of conversation, and coat each side completely. I don't care if you use POR-15, epoxy primer, whatever, but each side is coated. Now, this is where I may be off, since the rust is sealed from oxygen, how is it able to continue rusting?

When used together, they provide a coating that not only stops rust but prevents it from returning. Known for the unbeatable 3-step stop rust system, POR-15® is committed to innovation, quality control, and excellent customer service. Spray or Brush Application: POR-15 Topcoat will need thinning using POR15 Solvent for all spray and brush applications between 10-20%. Use 25-35 lbs.(172-240Kpa) pressure for normal semi-gloss.

Do not paint directly out of can. Like all POR-15 coatings, this should always be stirred, never shaken. Fuel Tank Sealer - The POR15 Fuel Tank Sealer is resistant to fuels, alcohols and fuel additives. Fuel tank sealer is poured into the tank and then the tank rotated in all directions to ensure the whole inside of the tank is coated. It chemically bonds to the tank forming a strong permanent seal which resists further corrosion. It is recommended that the tank is prepared using POR15 cleaner degreaser and then POR15 metal prep to ensure the tank is clean and rust free before using the tank sealer. POR-15 Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep to properly get your surface ready for the POR-15 Rust Preventive Coating. You'll be amazed at the toughness!Surface to be coated should be dry and free of grease, oil, and other contaminants. Use POR15 Cleaner Degreaser (Marine Clean), diluted 1 part Cleaner Degreaser to 8 parts water to remove light contamination. Then rinse with water and allow to dry. Clean with Cleaner Degreaser as above, then sand with 300 grit sandpaper and apply one light to medium coat of POR-15 Self-Etching Primer. Rust Preventive Paint is totally resistant to petrol, road salt and most acids and can be applied by brush or by spraying. The company attributes much of its success to the personal relationships it has built with its customers over the years, valuing their trust and loyalty. Private label business has also been important to POR Products, which has earned the trust of some of the largest paint companies in the country.

The quart (946ml)of POR15 top coat will coat approximately 100 sq. ft. with a single coat. The pint (473ml) will coat approximately 50 sq. ft. with a single coat.

AUTOMOTIVE: suspension – chassis – doors – trunk areas – engine & fuel tanks – rusty frames – floor pans – corroded battery tray. Founded in 1923 as Wood Finishing Products Co, the company produced shellac coatings and related products under the Absolute brand name, catering to a large market for shellac that existed before the introduction of alkyd paints. The company focused on using shellac, lacquer, varnishes, and polyurethanes for floor finishes for almost 95 years, and its founders were dedicated to producing the best products possible. The company later changed its name to Absolute Coatings to reflect the growth in its product line. This includes POR15 Rust Preventive Paint (113ml). Tin covers up to 12sq feet. Perfect if you don’t finish all in once.

pour POR15 into a paper cup and put the lid over the can to only allow minimum exposure to atmosphere. and if not protected will wear off in a few years time if you do not coat it with a Top Coat Paint.

POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes. POR-15 Metal Prep provides the best adhesion for on any metal surface, including aluminum and shiny polished metal surfaces. The simple process of this pre-paint cleaner for metal gently etches metal, creating an ideal anchor pattern for coatings such as POR-15 Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This metal etching solution will allow better adhesion of POR-15 Rust Preventive Coating or any other coating. This metal-etching rust neutralizer is not caustic, corrosive, toxic or flammable. Available in 3 sizes to suit fuel tank capacities - Up to 4.5 Gallon (Approx. 17 Litres for Motorcycle tanks), Up to 9 Gallon (Approx. 34 Litres) and Up to 18 Gallon (Approx. 68 Litres).