The Nitecore EDC27 has a pretty unique design, being slim and long, but without a bezel, or a normal-looking reflector. STROBEREADY™ που επιτρέπει γρήγορη πρόσβαση στην φωτεινότητα STROBE (Ευρεσιτεχνία No.ZL201320545349.4) The OLED display is pretty cool, and can be seen on many Nitecore flashlights these days. It shows the output level, voltage, and also the remaining battery life. Yes, that is very cool and helpful. And you don’t have to remember whether a red indicator LED means the battery has 5% left, or 25%.

It must be noted that not all flashlights come with easy-to-operate tactical designs, making the Nitecore EDC27 an EDC flashlight just as much as a flashlight made for tactical applications. User Interface When it comes to powering the EDC27, you don’t need to worry about buying a separate battery charger, or even batteries.

ANSI FL1 standards: The runtime is measured until the light drops to 10% of its initial output (30 seconds after turning it on). This does not mean that the flashlight is not usable anymore. The last column shows how long the light actually works till it shuts off. If there is a + symbol, it means that the test was stopped at that particular point, but the light was actually still running. This happens on certain occasions, with certain drivers, firmware, or batteries. Nitecore EDC27 Peak beam intensity and beam distance measurements When the screen is off, half press the Power Button to activate the screen before adjusting the brightness levels. Direct Access to ULTRALOW The EDC27 utilises two Luminus SST40 LEDs and a total reflective optic lens for uniform lighting beam pattern. Maximum brightness is 3000 lumens. The Nitecore features a built-in 1700mAh Li-ion battery that takes only 1 hour and 20 minutes to charge fully. That’s VERY impressive compared to other EDC lights that take about 4-5 hours to charge fully. This feature is especially useful when you’re in a situation where you need to conserve battery life and want to know how much longer your flashlight will last.

These switches are designed to provide an excellent grip, even when your hands are wet, ensuring you have complete control over your flashlight. The flashlight is reinforced with a carbon fiber polymer (CFRP) frame, making it more durable and impact-resistant.

Hardware specs

When the light is on / off, half press and hold the MODE Button (STROBE READY™) to access TURBO (3,000 lumens). Release to return to the previous status or turn it off. STROBE READY™ For high-output lights, one of the lux meters uses an ND camera filter to prevent the lux meter to max out. This is either the Kenko PRO1D ND16 up till about 80,000 lumens or Gobe ND32 for anything above. The brightness levels of the light are pretty impressive; after all, the range changes from 15 lumens to 3000 lumens across five modes. If you ask me for what activities you could use this? Well, there are quite a few, keeping in mind that the lowest level is 15 lumens. For some people, that may be too high, but it totally depends on the situation and use case. I’m always reluctant to test the impact resistance no matter how strong the flashlight is — yes, even one from a very reliable flashlight brand such as Nitecore. But I was a little reluctant to drop it since I had only one unit; however, the build feels strong enough.

Half pressing and holding the MODE Button (STROBE READY™) is still available for accessing TURBO while full pressing and holding the MODE Button (STROBE READY™) is available for accessing STROBE. Not only does the OLED display show you the current level and mode, but it also displays the lumen output and remaining battery life. The Nitecore EDC27 is a compact and reliable torch that offers a convenient and practical lighting solution. With a sturdy and durable construction, the EDC27 is built to withstand the rigors of everyday use.One of the most notable features of the Nitecore EDC27 is its hybrid heat dissipation system — that’s very interesting.

EDC27 διαθέτει σώμα από ανοξείδωτο ατσάλι υψηλής αντοχής με επίστρωση Τιτανίου PVD (φυσική διάσπαση υδρατμών) Nitecore is a reliable brand that has been dominating its good name in the west for so long. Although the company will continue to beat itself, it’s safe to say that the Nitecore EDC27 is remarkable. The combination of the features makes it the perfect companion for anyone. This gives you the freedom to attach various lanyard beads or other accessories to build your personalized style. The first thing that you notice about the Nitecore EDC27 flashlight is its interesting flat design. This form factor is one that you’ll either love or hate. I like it because the light won’t roll off the table when I set it down. The Nitecore EDC27 is a new flashlight from Nitecore with a slim profile design. Featuring a stainless steel body with a PVD (Physical Vapor Deposition) matte titanium coating. A copper and aluminium heat dissipation module helps draw heat away from the LEDs to provide longer lasting lighting.I measured the charge time 2 times, and both times, the total charge time was the exact same: namely 1 hour and 19 minutes. Powered by a built-in rechargeable 1700mAh Li-ion battery, which is charged via a USB-C port on the side of the light. The EDC27 is equipped with a multifunctional OLED display. (Please remove the screen protector before the first use.) When the light is turned on, the screen will successively show the current info (Brightness Level & Lumens, Runtime Remaining) before it goes out. After the screen goes out, half pressing the Power Button can reactivate the screen.