Second, make sure you can establish a direct link between your universal remote control and the device you wish to program. Closer is better. If something gets in the way (your cat, child, or even an object) and the process is interrupted, you will probably have to start over from the beginning. How Remotes Work Common method #3: Hold the device key down until the LED blinks several times. Then release the key and enter the first code.

Universal Remote Control - Lifewire How to Program a Universal Remote Control - Lifewire

You can use a universal remote to operate many devices, from TVs and VCRs to cable boxes, home theater receivers, and Blu-ray/DVD players. Programming can take quite some time in many circumstances, but here are some efficient ways to do it. Method 1: Universal Remote Instructions Manual

As opposed to standard remote controls, Universal remotes have a broader compatibility range, so they can be used with several devices. To program one of these remotes, you’ll need to push a sequence of buttons to sync the remote and your TV (or another device). Any advice on either the above or how to get my RM series remote to work, or suggest alternatives? Obviously now I have the web interface working I can use this but I would obviously just like a functioning remote! Thanks in advance!

RM Series Replacement Remote Control for SONY RM-ED059 RM Series Replacement Remote Control for SONY RM-ED059

When it comes to more expensive universal remotes, they may offer additional programming methods, such as using the PC with audio waves or through a USB connection. Furthermore, some remotes have auto-learning technology. Once again, the features and programming details are in the manual. Aside from entering codes, the instructions will provide help with programming your universal remote without them. This scenario covers anything not listed in the manual. It also comes in handy if the listed codes do not work for the intended device, which does occasionally happen since the codes are based on brand, not model. Also reported to work with RM-Y135, RM-Y154, RM-Y167, RM-Y168, RM-Y169, RM-Y170, RM-Y171, RM-Y181, RM-Y186, RM-Y902, RM-Y906, RM-Y144, RM-Y180. Whenever you push a button on your remote, it activates a signal from the remote’s circuit board to the other device. Basically, it sends a command code that tells your TV what to do. This is usually an infrared signal, so you need to be within thirty meters of the other device and within the line of sight. No matter what remote you have, if you cannot find a solution, consider the options discussed below. What is the Proper Way to Set Up a Universal Remote Control?

Also reported to work with RMT-D102A (Sony DVD), RMT-109A, RMT-D116A, RMT-D120A, RMT-158C, RMT-D185A, RMT-V201A, RMT-V203, RMT-V229, RMT-V231A, RMT-V232C (Sony VCR), RMT-V266, RMT-V306, RMT-V307, RMT-V402, RMT-V504A To better understand the programming process, it’s important to understand exactly how your universal remote communicates with the device it’s programming.

how to setup universal Remote RM-014S vs EcoStar 2 For Any

Common method #5: Press and hold the device button until the LED stays lit. Release the button and continue to press the channel up or volume up button repeatedly until the device turns on or off. Then press the device key or stop button to save your setting. Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting. Despite promising it would work immediately it doesn't. The power light on the remote lights up when buttons are pressed so the battery & remote seem to work fine. Common method #2: Hold the power button until the LED blinks and press the device key, followed by the first code. The instructions for entering device codes are mentioned above, but here are the most common ways to program a remote.