Open alexa app--settings--add new devices--Bluetooth--new pairing--search devices--Power Q20 Pro--pairing / connection---play music. Hi-Fi Stereo Deep Bass and CVC 8.0 Noise Cancelling: Equipped with an advanced chip with AAC audio codex and premium 14.2mm dynamic driver, Lecover Bluetooth Headphones delivers professionally-tuned immersive crystal-clear sound with a silky treble, smooth mid and punchy bass at any volume. If that doesn’t work, try resetting them. This can typically be done by pressing and holding the power button for 10-15 seconds. Once your earbuds are reset, try to pair them again. Press and hold the multifunction keys of the two headphones for 5 seconds until the red and blue lights flash alternately and then release. Turning on pairing mode will allow you to connect your device with other compatible devices. Depending on the device, the steps may vary, but the general process is usually the same.

Turn off and then turn on the headphones. For that you have to simply press and hold the Multifunction button for 3 seconds until the light flashes blue for 3 seconds. Life waterproof (Sweating, raining, washing face, showering, etc., swimming in water, etc. Are expect)For pairing just hold power button until the light flashes red & blue. Keep the device within 1 meter. Turn on the desired Bluetooth device and enable pairing. You could also delete paired information on the Bluetooth device and pair again. Press any one of the multi-function buttons on the left and right sides for 2 seconds and the power will automatically turn on, then you will hear a prompt tone for booting. To pair both earbuds together, start by turning on the device you are placing the earbuds in. Then, locate the Bluetooth settings on the device. Once you open the Bluetooth settings on the device, press the button on both earbuds at the same time for a few seconds until the LED light starts to flash.

Turn on the computer settings---devices-Bluetooth and other devices---turn on Bluetooth---add Bluetooth or other devices---search for Bluetooth devices---Power Q20 Pro-pairing / connection ---play music. Next, open the settings menu on your phone or other device and look for the "Bluetooth" option. Select it and then select your earbuds from the list of available devices. If everything goes as planned, your earbuds should now be successfully paired with your device!. How do I make my earbuds discoverable ? Once turned on again just go to the Bluetooth settings of your desired device and pair with Mpow Headphones. You should then see the earbuds appear in the list of Bluetooth devices on your device. Select the earbuds from the list and they should be connected. If that doesn’t work, then you may need to put the earbuds into pairing mode.Take one earbud (L or R) out from charging case, touch earbud till blue light flashes, there’s a voice prompt “ Power On”, keep touching till blue and red light flash alternately, there’s a voice prompt “Paired”. Turn on the settings of the phone/tablet --- Bluetooth --- turn on Bluetooth --- search ---Power Q20 Pro --- pairing / connection--- play music. Once you hear the tone, your earbud settings will be restored to the factory settings and you can now begin using them again. How do I reset my buds plus without the app?

The LEDs on the earbuds should start blinking to signal they're ready to pair with your phone or another device once you've held down the pairing button for a long enough period (often a few seconds). Turn off your earbuds manually(Tap the touch control panel of the earbuds for 5- 6 seconds there will be a voice prompt “power off” and the two earbuds will turn off at the same time ) and select "Forget this device" on your device's Bluetooth ANDDDD I turned off my bluetooth. I took both ear buds and placed them together at the battery port and again pressed the on button for another 5 seconds. Once both earbuds show up, you must select each one individually and then connect them. After they are connected, they should stay connected until they run out of battery life or you manually disconnect them. How do I turn on pairing mode? Step 3:Once you’ve enabled pairing mode, open the Bluetooth settings on the device you wish to pair with. Look for your device in the list of available devices and select it to begin the connection.Delete Bose headphones from Bluetooth list of your device and then the headphones are ready to pair again. Sketch map of the product Waterproof Wireless Sports Headphones Volume /Previous song Volume-/N ... 3.Turn on the settings of the phone/tablet --- Bluetooth --- turn on Bluetooth --- search ---Power Q20 Pro --- pairing / connection--- play music. The way to pair with computer/Laptop Turn on the com... Repeated charging and discharging the headset will cause the battery performance to decrease over time, which is normal for all rechargeable electronic products.