The colors can vary between the signal wires (L/R) so it’s important to use a multimeter to test for continuity between each signal wire and the tip (usually the L audio) and the sleeve (usually the R audio). When I tried connecting the Line 6 hx effect to the Fuchs to change channels I get a terrible feedback. Better still, they're designed with seamless integration with Roland products, from V-Drums to Cube amps.

Andertons Music Company is authorised and regulated by the Financial Conduct Authority, firm registration number 716155. I am trying to connect my mic to my DBX 286S but is ending up with a hum and the signal becoming extremely hot in terms of volume and play back. Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions. The cables can be used for different applications such as a stereo connection (right/left/ground), a balanced connection (hot/cold/ground), or a voltage divider connection (input/output/ground).

If a stompbox has stereo outputs where the R output can be mono to send to a guitar amp, will the left output (TRS) alone send a stereo signal to a PA so it will come out stereo or would it only be 1 of the stereo channels instead of both? These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. If you are using a high impedance mic, you’ll also need to use an impedance matching device between the mic and the input.

Andertons Music Company acts as a credit broker and not a lender and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance. KMR Audio Ltd is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. One definition I've seen says the Tip part is "Hot", the Ring is "Cold" and the Sleeve is a "Shield". Van Damme cables are trusted by professionals and recording studios worldwide including Abbey Road and the BBC.You should have gone a step further to discuss the internal wiring for a TRS cable and how it could be used for additional purposes. Im not that familiar with the DBX, but it looks like it’s only MIC input is the XLR jack and it’s 1/4 TRS is a line level input. Sure, you may need TRS cables to connect two balanced devices together, but just using a TRS cable to connect two single ended devices together will NOT turn it into a balanced connection. You can then choose which finance term you'd like to apply for, and change your deposit if you wish. For some reason the TRS cable not only corrects that, as expected, it increases the output by enough to notice.