Key Features: Brand B’s strips are highly flexible, allowing for easy installation on curved or irregular surfaces. Step 1: Begin by cutting your paper into smaller pieces. We recommend doing this so that you can easily take it apart after you’re done playing around with it.

We first note that the UV output for the product is 0.9 watts per foot. Based on our estimated UV light needs of 1 W per 100 sqft, we determine that we will need 2 W for our 200 sqft area (multiply by 2x). The solution to this problem is that you should buy a cheap 3M tape alongside the kit. It will ensure the durability of your installation. The strip is made of flexible PCB material, and the LEDs have plastic between each one so they won’t short out. The pixels are spaced 1/10th inch apart so you can easily sew them into clothing or fabric, or mount them to many different materials using double-sided tape. Specifications:LED profiles help to provide a sleek and eye-catching finish to a project, while safeguarding and prolonging the life of the LED strips housed inside. These intricately designed profiles are manufactured from Aluminium Alloy meaning the heat from the LED strip is easily dispersed.

The first thing you need to do is to find a place where you want to install your Led Strip Light. It needs to be in an area that has enough power supply and is not too close to any sources of heat or moisture. Most wall washers come in 2 to 4 ft lengths, and are designed to be mounted into the floor. The lamp itself can be adjusted so that the UV light energy can be directed at the specific angles required. The LED strips can be cut to length in 1-inch intervals, meaning you can install these in tight spaces such as photoboxes and display cabinets. Best of all, because they operate on very low voltage 12V DC, there is virtually no electrical or fire risk.

Site Customisation

After you are done with both sides, set the frame under an intense light for twenty minutes or so to cure it. After that, giving it epoxy will be easier and cleaner to handle. The remote control also has a timer function, allowing you to set a timer for the light to automatically shut off after a certain period of time. The remote control also has a brightness adjustment function and 3 light change modes (JUMP, FADE, STROBE), Prepare to work with the LEDs by cutting them into appropriate sizes. Make sure you cut them in the right length and width. Cut the led strip lights one after another so that they all have the same length. Make sure you cut exactly 5 meters long led strips. Step 2: Attach Led Strips To The Frame

When you need to make your party the hottest thing in town, these lights are great for making sure that everyone is dancing. Next, you will need to measure the length of your Led Strip Light and buy a power adapter that can support the length of your strip light. Make sure that it has enough wattage for the installation area. Key Features: Brand C’s strips are known for their energy efficiency, making them an environmentally friendly choice.high-quality LED or fluorescent bulbs, ensuring that you’ll never have to worry about running out of light. Next, apply glue at both top and bottom of the frame so that you attach all the edges firmly. Make sure there is no space between your led strips and the frame so that both things are touching each other. Step 4: Set the Frame Under The Light And Epoxy It For most basic applications, 1 watt of UV light energy output is sufficient to create strong fluorescence effects over a 100 sq ft area. For a 200 sq ft area, simply multiply the target UV levels by 2x for an estimated 2 watts of UV light energy needed. IMPORTANT: electrical watts does not equal UV light watts! As with regular household light bulbs (e.g. 60 Watts), we are most accustomed to describing UV light bulb power in terms of its electrical energy consumption. But as is the case with household light bulbs, what matters most is the amount of light energy produced. Step 5: Glue one strip of the LED strip onto each half of the square and trim off the excess LED strip.