For example, you can connect with a USB-C to USB-C cable if your computer has a USB-C port. For iOS or iPad devices, connect the interface with a USB-C cable (iPads with USB-C) or with the Apple Lightning to USB Camera Adapter (other iPadOS and iOS devices). With 2 inputs and 2 outputs, the Volt 2 follows a popular configuration UA Volt 2: Tried-and-true configuration With its retro-inspired industrial design, rugged metal construction, you can build your desktop studio with a stylish interface, built to withstand years of home and mobile recording. Connect your microphone, instrument, or line level source here. The combo input connector accepts XLR and ¼” (6.35 mm) plugs. Note: Install the hardware driver for low latency performance with audio creation, recording, and mixing apps. Set up Volt for audio software I/O on your Windows PC

Hardware compressors remain a popular choice for many producers though, particularly in larger pro studios. Particularly in the higher-end, hardware compressors are still sought out for their distinctive character and hands-on workflow. Due to the amount of power needed to run the increased I/O on the 476, it always needs to be used with a power supply (included).With Volt, you are given access to a carefully selected range of useful, creative and inspiring music production tools that will help you to create the music you've always dreamt of. Where other interfaces may include an overwhelming range of options, Volt gives you exactly what you need to stay inspired and level up your production. Discover plug-ins such as Celemony's Melodyne, a pitch correction software, as well as virtual instruments from Spitfire Audio and UJAM and of course a place to record it all onto with the Ableton Live DAW. Easy in, easy out MusicRadar verdict: Bad news for other affordable interface makers: these are great, with a spritz of hard-to-resist recording history magic on top. Universal Audio Volt 76 series: The web says On balance I think that UA have judged the implementation of this feature well. It adds a genuine USP that’s not available on any comparable interface, and for the most part, its effect is positive or at least benign. With only three preset settings, of course it won’t do everything you’d want a compressor to do, but in an interface targeted at new and inexperienced users, adopting the principle of ‘do no evil’ is very sensible.

These capable and great-sounding audio interfaces are ideal for a first studio build, and a worthwhile upgrade for existing small setups." Get all the audio and music tools you need from Ableton, Relab, Melodyne, UJAM, Marshall, Ampeg and more, to create on Mac and PC. Note: Volt is bus powered when connected to ports that meet USB 2.0 specifications. However, some USB ports, such as those on low-quality hubs, don’t meet USB specs and cannot supply adequate bus power. If Volt doesn’t power on, connect Volt to external 5VDC power to compensate for the underpowered USB port. (18) 5VDC PowerVintage preamp mode lets you capture guitar and vocals with the well-rounded, rich sound of an iconic UA tube preamp Each model thrives in different sonic scenarios; compare each model against one another below and find the one that’s right for you! The Volt interfaces are all class‑compliant devices, meaning no driver is needed for use under Mac OS. I’m told that the Windows ASIO driver is a variant of the familiar Thesycon affair, which should offer adequate if not class‑leading performance. No control panel software is required because there’s nothing to control: as with many small interfaces, direct monitoring is handled in hardware. A button labelled Direct routes audio from both inputs directly into the monitor path at a fixed level. On Volts with more than one input, a single press pans inputs 1 and 2 hard left/right, while a second press pans both centrally. If you were recording a stereo keyboard you’d choose the former option, whereas the second approach would be more useful in situations where you’re recording two separate sources, such as vocal and guitar. The headphone output always carries the same signal as the main line outputs, so this choice of routing applies to both. I should mention also that all the Volt’s buttons contain LEDs which illuminate attractively when pressed, making settings such as phantom power crystal clear.

Volt is bus powered when connected to a USB port that supplies adequate power. You can use the 5VDC connector to connect to power when required (for example, if you want to reduce power drain on an iPad or laptop, or if the USB port or hub is not able to provide enough power). In the past, all compression was done by analogue hardware units, which were often expensive and could be unreliable, but were heralded for the ‘character’ they would add to an audio signal (often through subtle saturation as well as distinctive dynamic response). As time has gone on, vintage tube-based compressors were replaced by more reliable and modern solid state equivalents. Over the past few decades, however, hardware vocal compressors have been largely eclipsed by plugin versions, which are far cheaper and more convenient in smaller studios, and often replicate the sound and design of their vintage hardware counterparts. For optimum gain, rotate the knob to adjust the input signal level while monitoring the source that is connected, so the input meter (12) shows signal but does not light red. The red input LED lights when the input signal is near 0 dB. With Volt, you can easily add the rich, full sound of iconic UA mic preamps. Each Volt Series USB Interface uses class-leading 24-bit/192 kHz audio conversion for Mac, PC, iPad, and iPhone.Dabei gesagt sei, dass das Interface stabil gebaut ist und nur die Oberseite bzw. das, was Grau ist, aus Plastik ist und keinerlei Bedenken an Qualität stellt. Your system sounds will now play through Volt, and the first input on Volt will be the default audio source. Your system sounds will now play through Volt, and the first input on Volt will be the default audio source. Set up Volt for audio software I/O on macOS

Note: The input level increases when the compressor is active, so you may want to readjust your Gain setting. (10) 76 Compressor Presets We include instructions for configuring Volt as the audio device for Ableton Live Lite (included in your software bundle).Note: The monitor outputs are not powered. You will need to connect the cables to either powered speakers or an amp with speakers. (16) MIDI I/O Rotate this knob to adjust the volume of speakers connected to the Monitor outputs. The output signal level meters (13) indicate the output levels. (7) Gain Knob The ‘76 models take the analogue processing a step further, with the main front-panel inputs featuring a built in all-analogue compressor that’s inspired by the classic UA/Urei 1176. This uses modern op-amps in place of the transformers and transistors found in the original, but still uses a discrete field effect transistor to modify the signal level. This gives the circuit the same compression characteristics as a 1176, albeit without the transformer-derived distortion of the original. Read the full details below on how to enter and find out how you can improve your chances of winning! Please note: the giveaway ends 10th March 2022, UK entry only. UPDATE: THIS GIVEAWAY HAS NOW ENDED. On each of the Volt 176, Volt 276 and Volt 476, you will find 3 different compressor presets based on the iconic UA 1176 vintage compression unit per preamp.