When natural flow rate is at 1.2 lpm TapBoost will increase the flow up to 7lpm (provided there are no restrictions in the pipework/outlet). If the natural flow rate is greater than 1.2 lpm TapBoost will increase your outlet flow rate up to a maximum of 11 lpm. In cases where both hot and cold water are to be boosted a twin pump is needed. Twin pumps have two impellers, one at each end of the pump, one for hot water and the other for cold water. Hot OR cold water The Flowflex In Line Micro Pump is a fully automatic, extra quiet pump for low pressure situations. The SP2B In Line Micro Pump is a compact and powerful hot water pump which can be retro fitted to any shower, tap or hot water system in minutes by any DIY enthusiast to boost water pressure and flow. If you have a combi boiler in your home your system is mains fed and relies on the local water authorities to provide water to your property boundary. This means that your water pressure and flow may vary at different times of day e.g.. when your neighbours are also using water too, or you may constantly have less water pressure and flow than you would like. Salamander Pumps offer a range of mains booster products including inline pumps and accumulator tanks to improve mains water pressure and flow in domestic and light commercial installations.

Hot water pumps help in enhancing the overall pressure and flow of water from your faucet or showerhead. With long years of expertise in this field, we have served a wide range of customers all over Australia, and because of this, we are known as the leading hot water booster pump suppliers. You will get peace of mind while performing several daily activities such as bathing, brushing your teeth with hot water booster pump installation at your premises. Whether you are worried about Heat Pump Hot Water Price or quality, our professional range of gravity hot water booster pumps will give you exceptional outcomes. What Causes Low Water Pressure? Our exceptional range of products offers you better savings on water billing annually. So, get our affordable water pump products and save an efficient cost on your water billing. The Flowflex in line micro pump is designed to boost water pressure to single taps or showers, bathrooms and even improve water pressure for the whole house. The Shower Power Booster is a quiet in line micro pump that is suitable for domestic installation on both gravity and mains system. The automatic pump can be installed on both positive and negative head applications and requires a flow of just 1.5 L/Min to operate. CT Force pumps have robust brass ends and brass impellers, and the range includes positive and negative (universal) pumps. Suitable for boosting the shower, bathroom, and whole house. The products in this range include a 5 year warranty and are available in 1.5, 2.0 or 3.0 bar.Slow water pressure could be caused due to various reasons and affect our overall lifestyle. The common reasons for low water pressure are Gravity, Distance From The Water Source, Low City Water Pressure, Additional Water Systems, Plumbing Problems, and a lot more other reasons. Buying a professional Hot Water Circulating Pump gives you peace of mind from all the water supply problems. What Our Hot Water Booster Pumps Offer You? Our professional range of hot water booster pumps and Hot Water Recirculating Pump offer you everything that you are looking for. Whether it be a timer, electric cord, or valve mounting, our excellent range of comprehensive water pump products works perfectly so that you get a one-stop solution for your water supply needs. Easy Installation

Our broad range of hot water booster pumps and other water pump products gives you easy installation so that you will be able to use it instantly to get better outcomes. Our product takes less than 1 hour for installation. Get the easy installation and make your life free from daily difficulties with our hot water booster pump installation in Australia. Save Money You need to work out whether you want to pump to the shower only or additional appliances, for example bath taps, the toilet cistern or washing machine. The CT Xtra twin range will pump the shower only, all other ranges are suitable for multiple household appliances. View our shower pump selector guide below for further information. Do you want to boost hot AND cold water or hot OR cold water? Hot AND cold water Choose TankBoost for a busy home, or when you need to boost water to multiple floors to achieve that enhanced shower performance, even when other outlets are running at the same time. In cases where either the hot or cold water is to be boosted a single pump is needed. A single pump only has one impeller which can be connected to either the hot or cold water supply. What bar rating do I need? The Salamander TapBoost is an intelligent domestic inline clean water pump intended to improve the flow to a single outlet/point of use (such as a tap, shower, toilet cistern) which suffers with a poor natural flow. It is suitable for use with mains water and tank fed water systems, with water up to 65°C.The Shower Power Booster is the only in line micro pump which is suitable for all systems and applications, it is also the lightest and most flexible pump on the market meaning you can install the pump where ever it is most convenient. Probably the most common application of this type of pump is in domestic hot-water heating systems. This where small in line pumps, usually using an electrical motor impeller, are installed in sealed closed circuit piping. The advantage of a single stage water pump is that the design keeps a water-tight seal. Below is a guide to determine what pressure/bar pump you’ll need to boost the water in your home. Once confirmed you can then select which pump range you prefer: Choose a pumped model when mains water pressure and/or flow are low – or when you are not sure on your mains water pressure/flow. Choose unpumped only when flow is more than 9 l/min and pressure is 2.0 bar.

An in-line pump is a type of centrifugal pump that has a vertical pump shaft, with inlet and outlet connections in the same line. These pumps differ from most other pumps in that the fluid enters and exits in the same direction. Single stage pumps only use impellers to drive liquid, as opposed to other more complicated systems using push-pull pistons. TapBoost is not suitable for boosting multiple outlets. If multuple outlets suffer from poor natural flow, Salamander pumps have a range of products that are suitable that you can find here .There are a few variations of this product. To be sure which one you need, you can follow this short guide below: Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide: Link multiple vessels together to increase performance. Only one vessel should be a pumped model in this scenario. We have a full range of In line micro pumps but our most popular is the SP2B automatic shower power booster. Applications For TapBoost to operate, there must be a natural flow rate from the outlet of at least 1.2 litres mer minute (lpm)

Flowflex reserve the right to alter the product ranges and specifications associated with its products without prior noticeCT Bathroom pumps have been designed specifically to meet the demand for increased water supply to the bathroom. With positive head and negative (universal) head models available in 1.8 or 2.6 These brands are all recognised as the world’s leading in-line pump manufacturers. What is an in-line pump? The CT Range of shower pumps have a regenerative impeller. They are long-lasting, hardworking, compact, and easy to install. Accumulator Tanks can offer even more flow than an inline pump, delivering up to 36 litres per minute. The AccuBoost range of accumulator tanks store water at pressure in the vessel and release this water into the system when there is demand in the property. They are available in a range of different tanks sizes, depending on your requirements, how many outlets you want to run at once and what space you have available in the property. Selected models will fit into a standard kitchen cupboard.