For thoroughly cleaning used or exceptionally dirty surfaces Initial cleaning of newly laid surfaces.

Apply and evenly distribute Lithofin MN Power Clean diluted up to 1:10 and wipe the surface. In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and brushing more vigorously. Please Apply and evenly distribute Lithofin MN Power-Clean as supplied or diluted up to 1:5 depending on the nature of the dirt. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry, add water if necessary. Brush again before wiping up. On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean water. If the result is not satisfying, repeat allowing the product to work longer and brushing more vigorously. Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF. For cement residues and rust discolorations on granite, gneiss, and similar acid-resistant stones, use Lithofin MN Builders-Clean.Lithofin Power Clean is best used for a one off clean when preparing a floor or other surfaces before applying anyone of several types of finishes. It is recommended that you thoroughly clean all natural stone surfaces before applying an impregnator, a seal or polish to natural stone. Power Clean is a good choice for such occasions. This product is also recommended for use as a stripper in to remove old finishes or in a more diluted form as an annual cleaner. It is not meant for use as a daily cleaner, when used on bathroom vanity tops and kitchen worktops it should be diluted to 1-part power clean to 10 parts water.

If the result is not satisfactory, repeat the process allowing the Lithofin MN Power-Clean to work longer and brush more vigorously. The Lithofin Power Clean is a specially made product for cleaning all natural stones including polished marble and limestone. It is excellent for cleaning slate, honed limestone, sandstones like Yorkstone and polished or honed granite. It can be used indoors and outdoors. It is a part of the very popular LITHOFIN-Range of cleaning products most of which are eco-friendly. The surfactants of Power Clean are Bio-degradable in accordance with EU-regulations. The container is made of environmentally friendly polyethylene and clean empty containers can be recycled through local collection services. Power Clean is supplied in 500ml and 1Ltr containers and is yellowish in colour. Both of the 500ml and 1Ltr bottles have child proof caps. It is mildly alkaline with a ph-Value of approximately 10 and is completely water soluble. Power Clean has a nonspecific light pleasant odour. Contractors can also buy this product in 5Ltr containers. Lithofin Power Clean is suitable for cleaning all types of natural stone surfaces. These include floors, walls, stairs kitchen worktops. It is suitable for use on all bathroom surfaces made of natural stone. These surfaces include polished marble, honed marble, rough marble, all the types of granite finishes, polished or honed travertine and slate. Power Clean can also be used for cleaning stone fireplace surrounds and hearths. THIS CARRERA MARBLE FIREPLACE WAS CLEANED USING POWER CLEAN AND A STEAM CLEANER Please note that the above charges are subject to a 65p surcharge for all deliverieswithin the London Congestion Charge area (EC1, EC2, EC3, EC4, N1, NW1 2, NW1 3, NW1 5, SE1, SE11, SW1, SW11, W1, W2 2, WC1 and WC2)Keep your stone clean with Lithofin MN Power-Clean. This high-quality cleaner is ideal for occasional deep cleaning right through to removing stubborn dirt. This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc. Lithofin MN Power Clean removes grease and oil, all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc. Apply and evenly distribute Cleaner for Grout Residue Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface.

Power Clean should not be used to clean Metal, Wood and any painted or varnished surfaces and should be kept away from wall paper. If any of these materials are close to or adjacent to your working area, they should always be protected first before using this product. This product is not suitable for use on leather, all types of fabric, carpets or laminate flooring and all these materials should be protected from splashes of this product. shelf life of approximately 3 years. LIMESTONE KITCHEN FLOOR LIMESTONE KITCHEN FLOOR – CLEANED WITH POWER CLEAN CONCLUSION Lithofin MN Power-Clean is formulated for the removal of ingrained dirt from heavily soiled floors, it is very good for cleaning newly laid floors and helps to remove cement, adhesive, and grout residues on smooth polished surfaces. Lithofin MN Power-Clean will also remove several types of light staining. On older floors, polish residues, the buildup of care products, acrylic emulsion, and much more can be effectively removed with the use of Lithofin MN Power-Clean. Please note that the courier we use offera next working day service as standard but this is not guaranteed.For an additional charge the following deliveryservices may also be available - Saturday Morning, Next Working Day Before 12 Noon, Next Working Day Before 9am (* Please telephone us on 01962 732325 to discuss.)

Giving You Peace of Mind

Allow the Lithofin MN Power-Clean to work for 10 to 20 minutes; brush occasionally. Do not allow it to dry by adding water if necessary. Externally it can be used on all natural stone surfaces including patios, walls and garden furniture etc. Stone paving slabs and drive ways can also be cleaned with Lithofin Power Clean. The only key to keeping your floors clean and free of dirt, residue, and stains is regular and efficient cleaning. Simply use Lithofin MN Power-Clean can be enough. If you’re unsure how Lithofin MN Power-Clean is used, chat with our team experts now! We are pleased to assist you. Lithofin MN Power-Clean is ideal for cleaning marble, natural and engineered stone. Lithofin MN Power-Clean is a product low in solvents, low in odour, and economical in use. It is a mild alkaline cleaner, which contains a balanced mixture of cleaning components that guarantee optimal performance. Externally it is suitable for use on an extensive range of natural and engineered stone patios and flagstones prior to jet washing. WHERE IT CAN BE USED

For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones. Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.

Oops! The product option you have chosen is out of stock.

Lithofin MN Power Clean is a special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). It is free of solvents, low in odour and economical in use. Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces, wallpaper, etc. Always test the Lithofin MN Power-Clean in an inconspicuous area prior to use. Power Clean is formulated for the removal ingrained dirt from heavily soiled floors, it is very good for cleaning newly laid floors and helps to remove cement, adhesive and grout residues. It will also remove several types of stain from all stone surfaces. These types of stains include oil, grease, tea and coffee. Power Clean can also remove recent wine stains and emulsion paint from floors etc. On older floors, polish residues, the buildup of care products, acrylic emulsion and much more can be effectively removed with the use of Lithofin Power Clean.