insert the SKU and select what the lookup will provide you, in your case "Aruba 2530 48G Switch (J9775A)". JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL259A, JL260A, JL261A, JL262A, JL557A, JL558A, JL559A JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A

RJ-45 10/100/1000 端口（IEEE 802.3 类型 10Base-T；IEEE 802.3u 类型 100Base-Tx；IEEE 802.3ab 1000Base-T 千兆位以太网）或 SFP 插槽（用于 SFP 收发器）端口 J8177C/J8177D is not supported for use in the Dual-Personality ports of the 2920 Series Switches. For use ONLY in the J9731A module. RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only For use in the SFP⁠+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed.RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the

Yes, if you have the HP/HPE/Aruba SKU (in your case it is J9775A representing the Aruba 2530 48G Switch model) you can go to the HPE My Networking portal (see here) found here:Only supported for use in SFP⁠+ ports on JL658A. 100-FX is not supported for use in any SFP56 ports on other models. RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full RJ-45 自动感应 10/100 PoE+ 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型100BASE-TX，IEEE 802.3at PoE+）：介质类型：Auto-MDIX；双工：半双工或全双工The 25G module (JL687A) requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). For J8692A, J8693A: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483, and J9054D 1990-4483 and 1990-4360) For J8705A and J8706A modules: All (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007

The YA.16.08 (generically the 16.08) is the cutting edge and it includes all the new features, the most conservative is now the the 16.02...personally I use the 16.05 and the 16.08...but it boils down to what feature you need (16.08 has more feature than 16.07, 16.07 has more than 16.06 and so on...). RJ-45 自动感应 10/100/1000 端口（IEEE 802.3 类型 10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab 类型 1000BASE-T）；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工 IEEE 802.3 类型10BASE-T，IEEE 802.3u 类型 100BASE-TX，IEEE 802.3ab类型 1000BASE-T）；双工：10BASE-T/100BASE-TX：半双工或全双工；1000BASE-T：仅全双工 Gig LH (J4860C/J4860D) is not supported on the 1850 series. Other 1850 models not listed do not have SFP ports.For use in the SFP ports on the models listed. Also for use in the dual-speed SFP⁠+ ports of the J9731A 2-Port 10GbE SFP⁠+ Module. Now few words regarding the "recommended software version"...actually, as you can see, for your Aruba 2530 (that is fairly generic for the entire Aruba ArubaOS-Switch NOS) there are 5 (five!) current software branches all receiving updates: RJ-45 10/100/1000ポート(IEEE 802.3 Type 10Base-T、IEEE 802.3u Type 100Base-Tx、IEEE 802.3ab1000Base-T Gigabit Ethernet)またはSFPスロット(SFPトランシーバーに使用)ポートとして使用可能 It forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.