I began with the pre-installed TFV18 Meshed 0.33ohm which was rated as ‘BEST AT 100-110 Watts’ but it’s best to break in a new coil at lower wattage.I started at 70 watts and worked my way up to the 110 watts after 10 or so puffs.The vape you get from this coil is a proper cloud lobbing DL airy draw.The flavour is decent but not outstanding, but this coil does favour clouds over flavour, I soon got bored of fogging the street up so it was time to swap over to my favoured coil. We recommend that you pair these coils with e-liquids that have been blended for sub-ohm vaping. Ideally, any e-liquids that have been mixed with a concentration of 70% VG or higher will yield the best results and maximise the life of the coil. The limited warranty covers any Electrical/Mechanical fault/defects in E-cigarette device under normal use during the warranty period. I see no reason not to recommend juice ratios of 70VG/30PG up to high VG with the RBA. It’s possible to increase coil diameters when using your own but just keep an eye on their positioning in relation to the inner chimney. Pros

There’s no doubting the Smok TFV18 is a heavy bugger and a lot of the weight can be attributed to the design of the child proof top cap mechanism. The legs of the included coils have been pre cut to a length of around 7mm, conveniently removing any guess work. It’s your classic semi restrictive lung style of vape without doubt, I would hazard a guess of around 30% more restriction than found with airflow wide open.

The TFV range of sub ohm tanks has always been characterised by the use of top quality stainless steel and Pyrex glass, so expect nothing less from the Smok TFV18. All Electronic Cigarettes components have limited life span and will eventually need to be replaced. For the purposes of testing I opted for Beard Vape Co #32 Cinnamon Funnel cake, a 70VG/30PG ratio with freebase nicotine added to the 50ml short fill bottle. Smok TFV18 – Airflow Wide Open I still get the same level of noise generated during inhale and in all honesty I’m not quite getting the same level of vapour production as that of the single mesh coil.

I would have to say that as a full, open and airy vape there’s still around 10% more restriction than found with the single mesh coil. Add your favourite e-liquid through the slot, paying attention not to drip it in the central airflow tube. What Smok has done is further capitalize on the capacity of the TFV18 tank and produced an RBA that looks to be large enough and easy enough to work on. It’s certainly solidly built. I also noticed that despite their size, the coils don’t contribute that much to the overall weight.The meshed coil spreads the heat over a wider area on the cotton for an even burn, providing excellent clouds and beautiful flavour. Once the height of both coils is to satisfaction, tighten the grub screws ensuring an adequate “bite” on the coil legs but not so much that the screws gets stripped in the process. I now discovered an issue to the airflow design. There’s a continuous whistling noise created by such a restriction that’s only solved by opening the ports to around 75-80% restriction (two thirds shut).

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling. x1 Screwdriver Frequently Asked Questions What products are the SMOK TFV18 Replacement Coils compatible with?

SMOK TFV18 Replacement Coils Parameters

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use. Utilising the excellent conductivity of copper, the TFV18 Mini features 5 braces on its base to efficiently transfer the power to the coil for circular and faster heating. There’s a standard version as well as an EU version. Both are identical and come complete with the contents as listed above.

Smok appear to be evolving into a serious player in the vape market.The Morph 2 kit is simply a great kit for those who enjoy high wattage DL vaping and for cloud fans, the quality and performance is really good.The screen is one of Smok’s best with a precise, clear and well laid out display.The size is just right and it is not the usual fingerprint magnet of past mods. Let’s put it this way, the 0.33ohm single mesh coil clearly favours and indeed craves airflow for optimal performance. Smok TFV18 – 0.15ohm Dual mesh coil 80-140W (Best 100-110W) On the underside of the top cap is a large silicone gasket or seal to help stop any potential leakage. I could easily recommend the Smok TFV18 sub ohm tank to an intermediate vaper and one that craves power, flavour and bags of vapour production.Bearing in mind that single coil tanks were still finding their feet this was a massive and highly significant moment for the vaping landscape. Please note Electronic Cigarettes often become faulty after being dropped repeatedly, the limited warranty does not cover any physical damage or wear & tear under any circumstance.