To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. The Digistat+3 features a simple and intuitive interface, allowing users to easily adjust the temperature according to their preference. It has a digital display that clearly shows the current temperature, as well as the set temperature. Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards:

This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process: Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat?

Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? The thermostat also features a "holiday mode" that allows users to set a lower temperature while they are away, further improving energy efficiency. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost? In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode?

In addition to its heating control functions, the Digistat+3 has a built-in frost protection feature that ensures the temperature never drops below a certain threshold, preventing freezing and potential damage to the heating system. The thermostat is designed to be versatile and compatible with a wide range of heating systems, including combi boilers, system boilers, and electric heating systems. It can be used as a wired or wireless thermostat, depending on the user's preference and the specific installation requirements. The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B Reset the Receiver by pressing the button for about 15 seconds until you see a red light followed by flashing orange/green which shows it is in pairing mode. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming

These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

Digistat+3

With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs. There are also known issues when pairing with Samsung smartphones using Android 11. Please change to an earlier or later version of Android.