Scroll to Source and press the scroll wheel button. Then scroll till you find your desired switch. Press the scroll wheel button to confirm. Throttle curves The Archer Plus RS mini receiver is perfect for M1 and M2 helicopters due to its compact size. It even comes with the correct adapter cable. The OMP M1 EVO comes as a BNF “bind and fly” helicopter kit, which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here). You can customize the model configuration as per your linking. Please refer to explanation of different settings. Switch Assignment

For OMP Protocol, there are no pitch curves on the Radio Transmitter as pitch curves are fixed inside the Helicopter. For other protocols, the below curves are used. Curve The OMP M1 EVO RC helicopter is the latest OMP Hobby helicopter design, and successor to the popular M1.

Product Parameters

R/C helicopters, including The OMPHOBBYM1 are not toys. R/C helicopters utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read the manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating all OMPHOBBY products. Usage Warning:Please note that this is not a toy and should not be used by a child without suitable adult supervision due to the high speed prop which might cause injury. The product includes a LiPo battery which will require safe handling/charging and should be regularly topped up when the model is not in use. **

The helicopter supports one one SBUS port. You can connect a SBUS compatible receiver to this port. It will override the internal OMP receiver. e.g. OSHM2055 S-FHSS micro receiver The OMPHobby M1 EVO RC Helicopter is the latest revision of the M1 helicopter. It has an updated carbon fibre frame and available in 4 new colours.Flight Controller: Integrated receiver with Built-in Futaba 2.4GHz Authorized S-FHSS Reveiving Protocol. Also support S.Bus/DSM/DSMX Receivers.

FUT/DSM: Change normal mode throttle curve to 0,5,5,5,5. We want governor to be engaged throughout except full negative. M1 is a high-quality product developed by OMPHOBBY for helicopter enthusiasts. Its compact size makes it flexible for either indoor flight or outdoor violent flight. The OMPHobby M1 RC Helicopter is the original high quality RC helicopter with 290mm blade diameter weighing in at only 118g. The M1 features dual brushless motors along side a powerful onboard flight controller that supports three flight modes - altitude stabilisation, soft 3D and aggressive 3D. The OMPHobby M1 RC Helicopter is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well. Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle.

The dual ESC 's are improved using high-quality MOSFET' s with lower internal resistance, enhancing the flight characteristics even further. The built-in official receiver supports S-BUS and DSM/ DSMX satellites. The flight controller has three built-in flight modes: stabilizing attitude, soft 3D and aggresive 3D.