Mask around the repair area on the tube with removable masking tape to prevent unsightly adhesive ‘overspill’ when applying the adhesive. Allow a 2-3mm gap around the pencil/removable marker line to allow for some stretch in the patch when applied. How to clean inflatable boats, protect RIB collars, tubes and sponsons, clean Hypalon and PVC inflatable boat fabric

DR BOAT LIQUID Patch Glue Repair Kit Hot Tub Boat Kayak

relative humidity less than 60% (low cost humidity meters can be obtained from most good DIY stores if unsure)

How to identify the fabric of your RIB, inflatable boat, dinghy, life raft or inflatable kayak collar, tube or sponson. Hypalon or PVC?

Repair Your PVC or Hypalon RIB How to Professionally Repair Your PVC or Hypalon RIB

How to replace a Leafield Marine A4 inflation/deflation valve older inflatable boats, RIBs, RHIBs and dinghies Before contemplating your tube repair and buying adhesive or a repair kit, you will need to identify the inflatable tube fabric that your boat is made from. The type of fabric determines the type of adhesive, solvent and patch fabric that is required to undertake the repair. How to undertake a professional quality repair of your PVC or Hypalon RIB, inflatable boat and SIB tubes Safety firstLocate the tear or hole on the tube. If unsure as to where the puncture is located, e.g. you have a ‘slow puncture’, then apply soapy water to the inflated tube and observe any bubbles forming at the puncture. Mark the location, dry the area and deflate the tube. How to make an emergency repair using TEAR-AID® Type B to a PVC inflatable boat, RIB, raft and other PVC / vinyl structures How to find a leak in my inflatable boat, RIB, dinghy, life raft or inflatable kayak collar or tubes Successful repairs to RIB collars and inflatable boat tubes are dependent upon the environment in which the repair is carried out - ideal conditions are: How to undertake a professional quality repair of your PVC or Hypalon RIB, inflatable boat and SIB tubes

Dr Boat Heavy Duty Repair Kit for Boat Kayak,Tent, Canoe

How to make an emergency repair using TEAR-AID® Type A to a Hypalon inflatable boat, RIB, raft and other Hypalon / rubber inflatable structures How to fix or glue inflatable boat PVC fabric patches and accessories to Hypalon fabric RIB collars and tubes (and vice versa)Insert the rolled-up, polythene covered, repair patch into the tube through the tear or cut in the tube.