Omada Cloud-Based Controller (Supported by EAP610 V1, V2, V2.2 and above, while is not supported by EAP610 V3) What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 15127 I admit I wasn’t very fond of the large cases of the EAP660 HD and the EAP670, and it seems that TP-Link did agree that their WiFi 6 access points can be a bit more compact. Which is why the v2 of the TP-Link EAP610 is way smaller, measuring only 9.6 x 9.6 x 2.5 inches (24.3 x 24.3 x 6.4 cm), rivaling the Zyxel WAX630S and the EnGenius ECW220 or the ECW220S. Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. Using the Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 06-08-2023 15398

Explanation of portal authentication failure after EAP is extended with Range Extenders 11-22-2021 31563 The only notable difference at the hardware level seems to be the combination of the front-end modules which probably pushed the results a bit differently. The attenuation was also not the same, so the antenna system most likely had a say about this as well. The testing procedure involves using three client devices, one is a WiFi 6 device (AX200) and two are WiFi 5 client devices (Intel 8265 and Pixel 2 XL). The TP-Link EAP610 is connected to an Ethernet switch (I still had the Zyxel XS1930 installed, so I used it in this case as well) and the client devices are connected to the 5GHz band (80mHz). TP-Link EAP610 vs Other WiFi 6 Access Points – 5GHz (80MHz) – 5 Feet – Upstream. Omada Cloud-Based Controller (Supported by EAP610-Outdoor v1.20 and above, while not supported by EAP610-Outdoor v1.0) Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-2022 52664 Feature Filter: All User Application Requirement Troubleshooting Configuration Guide official statement Further Assistance Q&A of functional explanation or specification parameters FAQsUsing the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a Controller (5.0 and Above) 05-31-2023 18164

Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Use of Wi-Fi 6 (802.11ax), and features including OFDMA and MU-MIMO require clients to also support the corresponding features. What's the difference between the Master Administrator, Administrator and Viewer accounts in the Omada Controller? 04-12-2023 15127 Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller.Please go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller.

Yes. Requiring the use of Omada Cloud-Based Controller (Supported by EAP610 V1, V2, V2.2 and above, while is not supported by EAP610 V3)

I was expecting to see a minor difference between the WiFi performance of the TP-Link EAP610 and the EAP610-Outdoors, but, while in some cases, they do come very close to each other, it’s still like looking at two completely different devices. And yes, the area was the same, the interference was pretty much equal and I used the same client devices. TP-Link EAP610 vs EAP610-Outdoor vs EnGenius ECW220 – Long-term speed test – 80MHz – Upstream – 5 feet. Zero-Touch Provisioning requires the use of Omada Cloud-Based Controller. Note that EAP610-Outdoor v1.0 doesn't support Omada Cloud-Based Controller.Please go to www.tp-link.com/omada-cloud-based-controller/product-list to confirm which models are compatible with Omada Cloud-Based Controller. The EAP610 is an excellent value access point. It's powered by the modern Wi-Fi 6 standard and a Gigabit port and allows you to skip additional AC adapters with an appropriate PoE network switch. Suppose you're looking to bring a reliable, seamless wireless network to a larger home or your place of business. In that case, it works perfectly with the TP-Link Omada SDN, albeit not directly with a cloud controller. Omada Mesh,Seamless Roaming, Cloud Access, and Captive Portal require the use of Omada SDN controllers. Go to Omada MeshProduct Listto find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods. Using the Omada SDN Controller to Manage Omada Devices Across Multiple Locations Via a VPN Connection (Controller 5.0 and Above) 05-05-2023 15750

Easily Upgrade to Business WiFi 6 Network

Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of Omada SDN controllers. Please go to https://www.tp-link.com/en/omada-mesh/product-list/ to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods.