Ethernet has evolved to include higher bandwidth, improved medium access control methods, and different physical media. The multidrop coaxial cable was replaced with physical point-to-point links connected by Ethernet repeaters or switches. [29] You’ve just passed the ethernet limitation of your phone by using a laptop and if are using ista diagnostics you can now easily run both with the same laptop. The connection is fast and secure.

My oh My – Ethernet Growth Continues to Soar; Surpasses Legacy". Telecom News Now. July 29, 2011. Archived from the original on November 18, 2011 . Retrieved September 10, 2011.Troubleshooting Ethernet". Cisco. Archived from the original on March 3, 2021 . Retrieved May 18, 2021. For typical home use such as connecting a router to a smart TV, a CAT 5e ethernet cable is more than adequate as the limiting factor will be your broadband speed, for HDMI over ethernet we recommend using CAT 6 full copper. Ralph Santitoro (2003). "Metro Ethernet Services – A Technical Overview" (PDF). mef.net. Archived from the original (PDF) on December 22, 2018 . Retrieved January 9, 2016. When DIY coding, make sure you place the laptop on the passenger seat or in your lap without moving around too much. If the Ethernet port is not exactly in tip top shape it could move or disconnect. HIGHLIGHTS – JUNE 2016". June 2016. Archived from the original on January 30, 2021 . Retrieved February 19, 2021. InfiniBand technology is now found on 205 systems, down from 235 systems, and is now the second most-used internal system interconnect technology. Gigabit Ethernet has risen to 218 systems up from 182 systems, in large part thanks to 176 systems now using 10G interfaces.

A non-uniform frame size configuration in the network using jumbo frames may be detected as jabber by end nodes. [ citation needed] If you have an F-Series or G-Series BMW model and you want to do some BMW coding, you will need to use an ENET cable for it. The ENET cable will serve as an adapter for your OBD2 port that will connect your car and your computer via a dedicated software. The most common BMW software paired with the ENET cable is E-sys. In this post, we’re going to discuss how to set up the ENET cable with the E-sys software for BMW coding. When a twisted pair or fiber link segment is used and neither end is connected to a repeater, full-duplex Ethernet becomes possible over that segment. In full-duplex mode, both devices can transmit and receive to and from each other at the same time, and there is no collision domain. [43] This doubles the aggregate bandwidth of the link and is sometimes advertised as double the link speed (for example, 200Mbit/s for Fast Ethernet). [j] The elimination of the collision domain for these connections also means that all the link's bandwidth can be used by the two devices on that segment and that segment length is not limited by the constraints of collision detection. STDS-802-3-400G] IEEE P802.3bs Approved!". IEEE 802.3bs Task Force. Archived from the original on June 12, 2018 . Retrieved December 14, 2017. Metz, Cade (March 22, 2023). "Turing Award Won by Co-Inventor of Ethernet Technology". The New York Times. Archived from the original on March 23, 2023 . Retrieved March 23, 2023.Charles M. Kozierok (September 20, 2005). "Data Link Layer (Layer2)". tcpipguide.com. Archived from the original on May 20, 2019 . Retrieved January 9, 2016. Advanced networking features in switches use Shortest Path Bridging (SPB) or the Spanning Tree Protocol (STP) to maintain a loop-free, meshed network, allowing physical loops for redundancy (STP) or load-balancing (SPB). Shortest Path Bridging includes the use of the link-state routing protocol IS-IS to allow larger networks with shortest path routes between devices. You should now see the prompt of selecting your vehicle model and type appear and it *Should* connect successfully!

Note: at the time this screenshot was captured, the Ethernet wire was not connected to the car, hence it is shows a red circle in front of the title “Ethernet”. Once connected to the car (or any active ethernet wire), the circle will be green.

The BMW ENET Coding Cable for F series is basically an Ethernet to OBD2 cable, the Ethernet end for your laptop and the OBD2 side for your cars connector. Connect the Ethernet adapter to your iOS device and the ENET cable and plug in the OBD connector into the OBD port in the footwell on the driver side in the car. Most F series cars will have the OBD2 port under the dash, above the pedals. Location of the OBD2 port is where the BMW ENET cable is connected.