We'd send the direct out to the FoH (meaning he'd be providing phantom power, but he'd get an unmolested signal), and the isolated outs to the XR18. Now with a source connected to Channel 1, you can send signals from the Channel 1 Outputs to the FOH and monitor systems – and the same signals via the Channel 2 Outputs to your recording interface and broadcast mixer simultaneously. The Behringer units have this very annoying habit of XLR's getting stuck in the input side of the unit.

Behringer MS8000 Ultra-Flexible 8-Channel Mic Splitter - DJ City Behringer MS8000 Ultra-Flexible 8-Channel Mic Splitter - DJ City

All of our products are new unless stated and come with a 30-day money-back guarantee and a 3-year warranty as standard. The majority of decisions are given instantly, so you could get your new gear sooner than you thought!Whether you use it to feed your monitor system, FOH or recording console or broadcast and recording interface, the MS8000 is worth its weight in gold - and it's so affordable! MS8000 có 8 ổ cắm Đầu vào XLR trên bảng điều khiển phía trước cho mic và hộp DI của bạn, cùng với công tắc LIFT / GND để loại bỏ tiếng ồn hoặc tiếng ồn khác từ các vòng nối đất. Especially if you're relatively comfortable with a soldering iron (which, to be honest, everyone here should be. It's also great that the Phantom Power from the mixer can pass through the splitter to power DI boxes and condenser mics on stage.

Behringer ULTRALINK MS8000 8 Channel Microphone Splitter

Second, seeing how it is not actually designed to be in a rack because of the interference it produces, if you want to remove the pointless mounting brackets, the ends are just open. There are 8 inputs with 16 outputs available on the MS8000 splitter, with each channel featuring direct and link outputs.When it comes to connectivity on the stage or in the studio, you can never have too much – and that’s where the ultra-flexible MS8000 8-Channel Microphone Splitter makes all the difference. MS8000 cực kỳ linh hoạt là một công cụ thiết yếu có chức năng mà mọi kỹ sư âm thanh hoặc ban nhạc nên có trong bộ công cụ của họ. This, for example, would allow you to connect to front of house and your in-ear monitors simultaneously.

UltraLink Products Ultralink ms8000 Quick Start Manual UltraLink Products Ultralink ms8000 Quick Start Manual

Perfect for my band, we plug instruments and mics into the inputs, and one of the outputs goes to our digital monitor mixer, and the other outputs go to the front of house. ALL of my rack equipment that passes audio is isolated from the rails, screws, and other units by Humfrees isolation tabs which are also available from Sweetwater. The only real downside is that having 2 outs on the back is quite a bummer for those who want to use it in a two face rack case and have both ins and half of the outs available.You will not delete, alter, or obfuscate any proprietary legends relating to the Image, and each use will be accompanied by the following attribution shown next to the Image: "Courtesy of Music Tribe IP Ltd. This configuration would be ideal for managing multiple playback devices for performance tracks, or converting stereo instruments to mono output. Additionally, to suit your condenser microphones and DI boxes, the MS8000 is phantom power ready to ensure optimal performance.

Behringer ULTRALINK MS8000 Ultra-Flexible 8 Channel

So, while my Seismic splitter wasn't perfect, I think one of those would be a much better choice than the Behringer units you're planning to use. Offering the ideal solution for live and recording musicians looking to send signals to multiple locations; including mixing and recording consoles, In-Ear Monitors (IEMs), floor wedges, broadcast trucks and more. You could then send your signal to front of house and a monitor mixer from Channel 1's outputs, while sending it to a recording interface and broadcast mixer from Channel 2's outputs. By employing the Behringer Ultralink MS8000's Input Link function, you can link two adjacent channels.

At one point we had five cables stuck, and we had to try and stuff them into our rack after each gig. The only downside (not a fault with this product but splitters in general) is the extra cabling required but I find that using pre-built snake cables greatly simplifies the setup and connectivity. There are 8 XLR inputs available on the front panel of the MS8000 for mics and direct injection boxes as well as a lift/ground switch to cancel humming noise caused from ground loops. The direct, which is a pass-thru, and allows phantom power, is actually labeled linked, and identified as pre-transformer.