Bed leveling: This is necessary to make sure the Creality Ender 7 3D Printer’s print head is the exact same distance from the bed anywhere in the X/Y coordinates of its print travel. To do this, you’ll move the print head to each corner of the print bed via the touch screen controls and then use the corresponding manual dial underneath to adjust the height of the print bed from the print head to where it just touches the sheet of paper. The paper acts as a feeler gauge, and after adjusting each corner, you move to the next until you have done all four at least 4 times because each corner affects the other 3 (hopefully with decreasing amounts each time). I found it worked best when I could just feel the nozzle scratching a little like a rollerball pen feels, but it’s subjective and the resulting print may result in you adjusting feel. For the price I would have expected auto-bed leveling considering that it’s included on some of Creality’s lower priced Ender models.

If you want to see the print settings for any of the prints I mentioned, you can find links to 3D Print Log in the description below. The linear rails reduce vibrations, stabilises and ensures ultra-fast printing. The service life is also approx. 78509 hours.The Ender-7 has a heated, silicon-carbide print bed, which is mounted cantilevered on the single lead-screw Z-axis. Four spring-loaded screws attach the bed to the z-axis, and allow for manual bed leveling. Power off your printer and put the SD card into your printer’s SD slot. Turn the power on. This will cause the printer to flash the firmware from the SD card to your printer CPU. This may take up to 1 minute on some boards. Overall the print quality is amazing. This God Of Wealth gcode was included on the micro-SD card, and was the very first print I printed after assembly. And it turned out great; the surfaces are smooth, the layers are consistent, and the included white PLA printed just fine. The Ender-7 is able to handle 0.1 millimeters to 0.3 millimeters layer heights with no issues. At reasonable speeds, it prints near the top of the class quality-wise.

Each side of a triangle corresponds to only one corresponding angle and is unique. Therefore, the triangle is the most solid shape. Therefore, it is also the most mechanically stable.Personal desktop-level product positioning caters to a small number of users with industrial fast printing needs.

In my opinion, this print test is successful, it saves me more than 14 hours, and the result comes out cheerful. Over I'm impressive by this ender 7. But if you are just planning print small model, you can find better solution in other 3D printer. but i hope you realize what changing the firmware does, for instance you no longer can use the lcd on the printer, so please really consider doing these steps to reduce your risksAesthetically, I think the Ender-7 is a good looking printer. It looks great sitting on a table top, and since the bed only moves up and down, theres no risk of the bed hitting the wall or a passer by like some of the other Ender models. Sound wise, the motors are quieter than the fans when printing at normal speeds. When printing at higher speeds though, that’s when you’ll start to hear the motors. It is still comfortable enough to stay in the same room with it while it is printing. Partially Assembled

MATERIALS Filament diameter: 1.75 mm Third-party filament: Yes Filament materials: Consumer materials (PLA, ABS, PETG, Flexibles) Speed is not the only thing that affects the print time, the thing that is really slowing us down is acceleration. Printer needs a specific amount of time to reach certain speed, it does not happen instantly. So with models like 3D benchy, the distance between one point and another is so small , that the printer never reaches its top speed, so when you print on ender 7, the print time is not greatly reduced. SOFTWARE Recommended slicer: Cura, Simplify3D, Repetier-Host,Creality Operating system: Windows, Mac OSX, Linux File types: STL, OBJ, AMF Unboxing and Assemble A new product always is released during the annual anniversary celebrations of Creality. So, the Creality Ender-7 3d printer is our latest high-end Ender series product. Continuation of the Ender-6 high-speed printing function in Ender-7, Continue to work on more speed breakthroughs.A fully optimised slicing path dynamically adapts the motion acceleration and deceleration algorithm to effectively ensure the quality and efficiency of the printing process.